(ASCEND) Pipeline 15 with Max4004 (ammended)

[Daniel <daniel@lynx.bc.ca>]

Hi folks,

I have clients using win95 DUN and pipeline 15 1.0 trying to connect to our
Max4004 (5.0Ai13). It connects fine but it only connects at 56K as
indicated on our Max. We have tried to configured the pipeline by puting
"S68=64" and "%A4=0" in the "Extra Setting" of DUN but it did not help. I
then use "hyper terminal" to dial in to our Max and I see it connect and
"Carrier 64000". It seems that it is connected at 64K but the Max shows
only 56K (both Xmit-Rate and Data-Rate). Is it really connect at 64K or
56K? Pipeline 75 and other ISDN modem are fine.
I tried it on three pipeline 15 and they give me the same results.

Any ideas ?

Daniel
Lynx Internet

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) SNMP Set to Reboot Max
• Next by Date: (ASCEND) Pipeline 15 with Max4004
• Prev by thread: (ASCEND) Pipeline 15 with Max4004
• Next by thread: Re: (ASCEND) Pipeline 15 with Max4004 (ammended)
• Index(es):
  • Main
  • Thread