(ASCEND) IP Pools

[Salik Mobin <s.mobin@cyber.net.pk>]

Hello Folks,

I have a Question. I'm configuring MaxTNT for two address pools but it seems tha t if i'm missing something b,cuz it only respond to one pool of IPs. The config. is as under: 

[in IP-GLOBAL]
system-ip-addr = 208.237.102.2
soft-ip-interface-addr = 0.0.0.0
netbios-primary-ns = 0.0.0.0
netbios-secondary-ns = 0.0.0.0
must-accept-address-assign = yes
pool-summary = no
pool-chaining = yes
pool-ospf-adv-type = type-1
pool-base-address = [ 208.237.102.3 208.237.103.1 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0+
assign-count = [ 243 241 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 

interface-address* = { { shelf-1 slot-3 4 } 0 }
ip-address = 202.163.102.2/24
netmask = 255.255.255.0
proxy-mode = Always  

IP-ROUTE/default read
admin> list
[in IP-ROUTE/default]
name* = default
dest-address = 0.0.0.0/0
netmask = 0.0.0.0
gateway-address = 208.237.102.1
metric = 1                    

The Route is set active and private both.

This is exactly what ascend says, but it seems not working as clients are getting IPs from both pools but but those who are getting it from 237.103 pool, cant browse and keeps on getting ping timeout even if they try to ping the default gateway. One thing which i would like to mention is that the WAN connection i made which has a fixed IP 208.237.103.248/32 (from 2nd pool), works fine. So what could be the Probem????

Any help in this egard will be highly appreciated as the matter is very Urgent.

Thanks.
Salik Mobin
Network Support Engineer
Cyber Internet Services (pvt) Ltd.
http://www.cyber.net.pk

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>