Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) [ASCEND] Incoming Ping/Telnet fail on a P50 with NAT/SAM
-BEGIN REPLY-
Yes, I have 2 p130's.... And one of them has the exact same problem...
I cannot Ping, or telnet to the Remote P130 (Neither can the people who
are local to it) but yet, all of the static Mappings work just fine...
Ascend suggested that it might be bad lines, and I did notice MASSIVE CRC
errors on the line.. (about 1100 for a 48-hour WAN session) So hopefully
Ameritech will Check our line, find it dirty, Replace it, and my problem
will be resolved... I'll Post a followup, if that fixes it.
Mlist@kamel.starvo.com
-BEGIN ORIGINAL-
> I have a Pipeline 50, which is given a Static IP when it connects to the Net,
> and all outward functions seem to work fine.
>
> However, I am unable to ping or telnet into the router from a remote site.
>
> I spent an hour on the phone with Ascend support yesterday, who assured me
> that setting a static mapping would work, which doesn't seem to.
>
> Using the natl command the router does give me back the proper IP yet I
> cannot ping/telnet/traceroute to it.
>
> Has anyone had any experience with this?
>
>
> ---
> Larry Siegel | C A R R O L L - N E T, Inc.
> 201-488-1332 voice | New Jersey's Premier Internet Service Provider
> 201-525-0424 dialup |
> http://www.carroll.com | Ask about our ISDN service!
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: