Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX 6000 -Dialup Static IP's
I had already solved the problem it was indeed the Framed-Netmask needs to
be set with Ascend gear. Thanks to all that helped.
Regards
Scott Stavretis
Connect Direct Internet
---- www.cdi.com.au ----
On Wed, 14 Apr 1999, Jason Nealis wrote:
> You seem to be missing the netmask assignment from radius. For a /32 you
> would need the following within your user profile..
>
> Framed-Netmask = 255.255.255.255,
>
> :)
>
> Jason Nealis
> Director of Internet Operations
> RCN
> ----- Original Message -----
> From: CDI Tech <scott@cdi.com.au>
> To: <ascend-users@bungi.com>
> Sent: Tuesday, April 13, 1999 9:44 PM
> Subject: (ASCEND) MAX 6000 -Dialup Static IP's
>
>
> >
> > Hello,
> >
> > I am having trouble configuring max 6000 to be able to give dialing users
> > static ip addresses. I am giving it to them via Livingston Radius, the
> > entry is (this works with my portmasters)...
> >
> > blah Auth-Type = System
> > Service-Type = Framed-User,
> > Framed-Protocol = PPP,
> > Framed-IP-Address = 203.x.x.x.x
> > Framed-MTU = 1500
> > Idle-Timeout = 0
> > Session-Timeout = 0
> >
> >
> > Dynamic IP's work fine with my default entry.
> >
> > DEFAULT Auth-Type = System
> > Service-Type = Framed-User,
> > Framed-Protocol = PPP,
> > Framed-IP-Address = 255.255.255.254,
> > Framed-MTU = 1500
> > Idle-Timeout = 1800
> > Session-Timeout = 14400
> >
> >
> > The static IP addresses are not listed in the assigned pool on the max, I
> > have tried with Pool Only=Yes and Pool Only=No
> >
> > The same users with the same radius setup can connect using static ip's
> > fine from out pm3's.
> >
> > Thankyou in advance for your reply.
> >
> > Regards
> > Scott Stavretis
> > Connect Direct Internet
> > ---- www.cdi.com.au ----
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>