Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) 7.0b6 for Max family
The 7.0b6 beta release for the MAX family is now available to registered
users on www.ascend.com. The user will see a link to the Beta Agreement
Form from their logon confirmation screen.
The agreement starts at: http://www.ascend.com/private/beta
If the user accepts the agreement they are taken to an index page with all
of the available images. The cumulative release notes for this software
are detailed per beta release.
The 7.0b6 beta release for the MAX family contains the following:
Features:
* Radius Vendor-Specific Attribute (VSA) support
Corrections:
* TR 3301 SNMP:MAX replies incorrect ipRouteProto MIB value of (32)
and (33)
* TR 3597 MAX does not kill link when CHAP authentication fail.
* TR 258581 LAN Security Error using CLID callback
The 7.0b4 beta release for the MAX family contains the following:
Corrections:
* TR 3245 PIAFS: 17th call is accepted with no data communication
* TR 3604 Framed-IPX-Network attribute doesn't work on MAX
* TR 3792 MAX Reset With Fatal Index 8
* TR 3794 Immediate Modem failed when "Imm. Modem Access = User"
The 7.0b2 beta release for the MAX family contains the following:
Features:
* R2 CLID processing added for Malaysia
* Authentication failure message sent to PPP client
* Reserve call capacity based on called number
* E1 ISDN redirection number stored in RADIUS accounting
* Per-session anti-spoofing filter
* Proxy-QOS and TOS support in the MAX
* A single load created for R2 Brazil
* Send Name added to Connection Profile
* Ability to Set or Get NAS Port ID format via SNMP
* SNMP support for ATMP-related information
* Ability to manage DNIS via SNMP
* Type of service support
* Need SNMP MIB for ATMP
* SNMP: (7.0) Allowed NAS Port ID format to be GET/SET via SNMP
* MultiVoice: VOIP ANI (a.k.a CLID) feature
Corrections:
* TR 3599 Quiescing PRI Line not resulting in intended effect
* TR 3213 E1 K56 maxes exhibit lower modem performance
* TR 3285 10-100 Windows does not match sessions windows
* TR 3336 CLID authenticated MP calls (internal ISDN TAs) are not
cleared correctly
* TR 3358 Frame Relay Backup Routing Problem
* TR 3370 Can't make an outgoing call on Ports 1-2 of Net/BRI card
* TR 3380 Max refuse sync call after running few weeks
* TR 3389 Fail to response to FDL request and does not generate FDL data
* TR 3458 MAX rejects CBCP callback when turn on CLID auth
* TR 3474 IP Pool Leak
* TR 3523 Max Stacking failed to bind channel by a specific broadcast
packet
* TR 3557 SNMP resets places a warning 176 before reseth
* TR 3561 Max on 6.1.0 reboots (resets) with Fatal Error 1 (FE 1)
* TR 3567 SNMP Reboot trap logs misleading information
* TR 3580 Max constantly rebooting with FE1
* TR 3751 Invalid entries in "show users" output for stacked calls
* TR 250121 IP pool leak if there are no gaps between pool ranges
* TR 250249 After a period of time Max Stops routing packets to dial-up P50s
* TR 250289 Max 4000 incorrectly interprets TCP-Clear packets as Async-PPP
* TR 258594 Maximum of 59 DTPT ZGR out
The 7.0b0 beta release for the MAX family contains the following:
Features:
* ISDN BRI "U" interface Network Card for MAX400x
* AO/DI (Always On / Dynamic ISDN)
* Suppress Host Route Advertisement/dial out record Enchantment
* Request for DHCP and NAT on the Multiband MAX 6000
* After radius auth, return attribute 18 back to PPP dialin client
* 4BRI version of MAX1800
* R2 CLID processing added for India
* Add security profile attribute to connection profiles
* Add two new options to the TSAVE command
* MD5 authentication for OSPF (RFC2178)
* MAX 200: Reassignable status menus
Rockwell code versions:
Series56 Digital Modem Modules support Rockwell 2.084 firmware.
V.34 Digital Modem Modules support version 1.610G19.
Rockwell 2.084 firmware supports v.90, K56flex, K56plus, and all slower,
standard modem speeds.
Notice of discontinuance:
Software support for V.34 modem slot cards will be phased out of new TAOS
code releases beginning with TAOS 7.1. The last TAOS release to contain
software support for V.34 slot cards for the MAX family is TAOS 7.0.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: