Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) "Ascend-Maximum-Call-Duration" Not working - Re-Post
Willie,
Thanks for your in depth reply. Were running software version 6.1.7 on
our Maxes. I did a radius debug on the Max and got the following:
-----------------------------------------------------------------------
RADIF: _radCallback: processed acct server type=0
RADIF: radius type Auth ID = 24
RADIF: authenticating <5:USERNAME> with PAP
RADIF 12:55:25> _radiusRequest: id 24, user name <6:USERNAME>
RADIF: _radiusReq: challenge len = <0>
RADIF: _radiusReq: socket 7 len 83 ipaddr 198.145.166.11 port 65534->1645
RADIF:_radiusReq: id 24 <6:USERNAME>, starting timer (10 sec)
RADIF: _radCallback: buf=B05C6B20 from 206.251.77.11 1645
RADIF: _radCallback, authcode = 2, id 24
RADIF: _radCallback: id 24, killing timer
RADIF: Authentication Ack
RADIF: attribute 1, len 8, 77 76 69 65
RADIF: attribute 4, len 6, c6 91 a6 0e
RADIF: attribute 5, len 6, 00 00 4e 9c
RADIF: attribute 61, len 6, 00 00 00 00
RADIF: attribute 6, len 6, 00 00 00 02
RADIF: attribute 7, len 6, 00 00 00 01
RADIF: attribute 24, len 2, 2c 0c 32 37
RADIF: _setProfile(state=), data=<,
274982618>
RADIF: attribute 44, len 12, 32 37 34 39
RADIF: attribute 6, len 6, 00 00 00 02
RADIF: attribute 6, len 6, 00 00 00 02
RADIF: attribute 7, len 6, 00 00 00 01
RADIF: attribute 9, len 6, ff ff ff 00
RADIF: attribute 8, len 6, c6 91 a6 1f
RADIF: attribute 10, len 6, 00 00 00 00
RADIF: attribute 132, len 6, 00 00 00 00
RADIF: attribute 13, len 6, 00 00 00 01
RADIF:_freeInfoClassSess
RADIF: radius type Acct ID = 59
RADIF: _radiusAcctRequest: type 0 id 59, user name <6:USERNAME>
RADIF: _radiusAcctReq: socket 10 len 100 IP 198.145.166.11 port 1027=>1646, ID=59
RADIF: _radCallback: buf=B05A6CA0 from 206.251.77.11 1646
RADIF: _radProcAcctRsp: user:<6:USERNAME>, ID=59
RADIF:_freeInfoClassSess
------------------------------------------------------------------------
I did not see the the attribute 194. Does that mean that Merit Radius is
not passing this attribute?
Thanks,
Ken Rea
On Fri, 25 Sep 1998 Willie.Meagher@ascend.com wrote:
>
>
>
> Ken,
>
> What software are you running on the MAX ? I believe there was an issue
> before where the Max-Call-Duration in the Answer profile overrides any
> setting for the same attribute in Radius. This issue was opened against
> 5.0Ap42. I no longer work in the MAX Support Group and don't know if this
> was fixed in the 6.0 or 7.0 branch of code. If you're using 6.0/7.0, you
> might want to contact the appropriate group in TAC to report the
> issue/check for a fix.
>
> Have you tried using Ascend-Maximum-Time = 0 in the Radius profile. This
> is a different attribute number than Ascend-Maximum-Call-Duration and may
> work.
>
> What's the difference between Ascend-Maximum-Time and
> Ascend-Maximum-Call-Duration, I hear you ask.
>
> Ascend-Maximum-Time - Specifies the maximum number of seconds that the MAX
> allows the call to stay connected. When the time expires, the MAX
> disconnects the call.
>
> Ascend-Maximum-Call-Duration - Specifies the maximum number of minutes that
> the MAX allows individual channels in a call to stay connected. When the
> time expires in single-channel calls, the MAX disconnects the call. When
> the time expires for a channel in a multi-channel call, the MAX disconnects
> only the single channel leaving the call still connected.
>
> NOTE: For single-channel calls, the functionality of Ascend-Maximum-Time
> matches the functionality of Ascend-Maximum-Call-Duration. Because of
> this you may also see the same problem if you use Ascend-Maximum-Time in
> your Radius profile.
>
> BTW, have you confirmed that the MAX is receiving the appropriate
> attribute (Ascend-Maximum-Call-Duration) from Radius. You can turn on
> radif in debug on the MAX and verify that attribute # 125 is being passed
> back to the MAX.
> (Ascend-Maximum-Time is attribute # 194)
>
> Willie
>
>
>
>
>
>
> Ken Rea <wildcat@pcez.com> on 09/25/98 11:49:27 AM
>
> To: ascend-users@max..bungi.com
> cc: ascend-users-digest@max.bungi.com, kevin@ascend.com
> Subject: (ASCEND) "Ascend-Maximum-Call-Duration" Not working - Re-Post
>
>
>
>
>
> We did not get an answer to this so we are doing a re-post - Thanks!
> -----------------------------------------------------------------------
>
> We cannot get the radius call "Ascend-Maximum-Call-Duration" to work on
> the 4048 properly. We have also tried the "Session-Limit" with the same
> results.
>
> Inside the 4048's we have set the Ethernet->Answer->Session options->Max
> Call Duration to 360 and this works fine. But for clients that have a
> dedicated connection we need to disable this time out.
>
> We are running Merit Radius Server and have enclosed an excerpt from our
> users file. With Merit Radius, the vendor ("Ascend:") has to be put in
> front of the line.
>
> Has anyone had experience in getting this to work properly?
>
> Thanks,
>
> Ken Rea
>
>
> userid Authentication-Type = Unix-PW
> Service-Type = Framed,
> Simultaneous-Use = 1,
> Service-Type = Framed,
> Framed-Protocol = PPP,
> Framed-IP-Netmask = 255.255.255.0,
> Framed-IP-Address = 198.145.166.31,
> Framed-Routing = None,
> Session-Limit = 0,
> Ascend:Ascend-Maximum-Call-Duration = 0,
> Framed-Compression = Van-Jacobson-TCP-IP
>
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
>
>
>
>
Ken Rea
wildcat@pcez.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>