Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Re: "Ascend-Maximum-Call-Duration" Not working - Re-Post
As far as I can tell this *should* work - so, lets start from
there. Firstly, have you run radius debug on the MAX to capture the
authentication response and check this item there? Secondly, there
does appear to be another attribute in the Ascend dictionary that
has an overlapping description - Ascend-Maximum-Time - have you tried
this option?
As far as I can tell both of these should work. If not, then we can
describe the scenario under which they are failing, and pass this on
to TAC.
At 11:49 AM 9/25/98 , Ken Rea wrote:
>
>We did not get an answer to this so we are doing a re-post - Thanks!
>-----------------------------------------------------------------------
>
>We cannot get the radius call "Ascend-Maximum-Call-Duration" to work on
>the 4048 properly. We have also tried the "Session-Limit" with the same
>results.
>
>Inside the 4048's we have set the Ethernet->Answer->Session options->Max
>Call Duration to 360 and this works fine. But for clients that have a
>dedicated connection we need to disable this time out.
>
>We are running Merit Radius Server and have enclosed an excerpt from our
>users file. With Merit Radius, the vendor ("Ascend:") has to be put in
>front of the line.
>
>Has anyone had experience in getting this to work properly?
>
>Thanks,
>
>Ken Rea
>
>
>userid Authentication-Type = Unix-PW
> Service-Type = Framed,
> Simultaneous-Use = 1,
> Service-Type = Framed,
> Framed-Protocol = PPP,
> Framed-IP-Netmask = 255.255.255.0,
> Framed-IP-Address = 198.145.166.31,
> Framed-Routing = None,
> Session-Limit = 0,
> Ascend:Ascend-Maximum-Call-Duration = 0,
> Framed-Compression = Van-Jacobson-TCP-IP
>
Kevin Smith (kevin@ascend.com)
Ascend Communications...
...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: