Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Lan security error woes
What is the auth timeout set to on the MAX? Have you tried tweaking
this to see if it might help?
At 07:58 AM 9/23/98 , System Administrator wrote:
>
>Hello fellow listers,
>
>New to the list. Hope you can help with my problem.
>
>SITUATION:
>We got here a Max 4048 with 5, 16 port (yes, 5) modem cards in it and 3
>ISDN PRI lines installed, NFAS'd with 1 D-channel.
>Code is v6.0.2
>Users dialing in are analog users at 56k or below.
>Authentication is via a 3com RADIUS and accounting server on NT. DB is sql
>(access 97) with ODBC drivers. Relevant RADIUS attribute values that
>RADIUS is sending are FRAMED_ADDRESS = "255.255.255.254" USER_SERVICE_TYPE
>= 2 FRAMED_PROTOCOL = 1 FRAMED_ROUTING = 0 FRAMED_COMPRESSION = 1
>
>IP pools are as follows:
>Pool# Base Count InUse
> 1 205.147.217.1 59 20
> 2 205.147.217.193 62 0
> Number of remaining allocated addresses: 0
>
>PROBLEM:
>When the box gets busy (65+ users), users are dropped off right after they
login.
>Error is "LAN security error". In syslog, disconnect code is 101, progress
>code is 67. When activity drops, <55 users, errors almost all but
>disappear.
>
>I'd upgrade to a newer code to see if it fixes it, but it doesn't look
>like there's a way to turn off V.90 in it, is there?
> (we run both Kflex and X2 servers and have found V.90 to be too unstable)
>
>our max4004 with 2 PRIs and 4 12 port cards has no problem with these LAN
>errors, nor have problems on our X2 boxes. (this kind of problem anyway, i
>wont even go into how bad Total Control hubs are)
>
>
>Any help is appreciated. Thanx,
>
>-Tony
>.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
>Anthony J. Biacco Network Administrator/Engineer
>admin@intergrafix.net Intergrafix Internet Services
>
> "The best way to predict the future, is to invent it."
>http://cygnus.ncohafmuta.com http://www.intergrafix.net
>.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
Kevin Smith (kevin@ascend.com)
Ascend Communications...
...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: