Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Question on Multi-Tech proxy server and Ascend MAX
I'm using 6.0.8 on a MAX4004. I have tested two modems on a laptop,
one PCMCIA and an external using MS DUN1.2 with good throughput results.
The problems I have are unique to the Multi-Tech / MAX combination.
Sincerely,
Nelson Llabona
-----Original Message-----
From: Kevin A Smith [SMTP:kevin@ascend.com]
...
At 11:50 AM 9/18/98 , Llabona, Nelson wrote:
>Have any of you used the MULTI-TECH Proxy Server 200-Series ?
>
>The Proxy server has 3 embedded 56k-flex modems.
>If I use one modem connection, PPP, everything works great.
>
>BUT, if I enable "MLPPP" on the proxy server transfers slow to a crawl
>or cease, even if I only use one modem.
>
>I've tried enableing 2 modems and MLPPP on the proxy server,
>and my RADIUS account is set to Framed-Protocol = MP.
>I tried MPP, same behavior.
>
>Any ideas ?
>
>BTW, the two modems do connect, data transfer just blows.
Are you using a farily recent software load on the MAXen? I've seen a
couple
of reports recently on this list that people are getting analog MP
connections
that work pretty well - so it might be a revision issue?
Are the data transfers that you refer to "crawling" from the MAX to the
MT, or the other way around?
Kevin Smith (kevin@ascend.com)
Ascend Communications...
...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: