Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ASCEND) MAX TAOS 7.0b4 Beta Release

The 7.0b4 beta release for the MAX family is now available to registered
users on www.ascend.com.  The user will see a link to the Beta Agreement
Form from their logon confirmation screen.  

The agreement starts at:  http://www.ascend.com/private/beta
If the user accepts the agreement they are taken to an index page with all
of the available images.

This beta release for the MAX family contains the following cumulative
corrections and enhancements, documented per beta software release:

The 7.0b4 beta software for the MAX family contains the following:
Corrections: 
TR       Description
3245    PIAFS: 17th call is accepted with no data communication (accepted
at HDLC control)
3604    Framed-IPX-Network attribut doesn't work on MAX (broken)
3792    MAX Reset With Fatal Index 8
3794    Immediate Modem failed when "Imm. Modem Access = User"


The 7.0b2 beta software for the MAX family contains the following:
Features:
     Description
*    R2 CLID processing added for Malaysia
*    Authentication failure message sent to PPP client
*    Reserve call capacity based on called number
*    E1 ISDN redirection number stored in RADIUS accounting
*    Per-session anti-spoofing filter
*    Proxy-QOS and TOS support in the MAX
*    A single load created for R2 Brazil
*    Send Name added to Connection Profile
*    Ability to Set or Get NAS Port ID format via SNMP
*    SNMP support for ATMP-related information
*    Ability to manage DNIS via SNMP

Corrections:
TR       Description
3599     Quiescing PRI Line not resulting in intended effect
3213     E1 K56 maxes exhibit lower modem performance
3285     10-100 Windows does not match sessions windows
3336     CLID authenticated MP calls (internal ISDN TAs) are not cleared
correctly
3358     Frame Relay Backup Routing Problem
3370     Can't make an outgoing call on Ports 1-2 of Net/BRI card
3380     Max refuse sync call after running few weeks
3389     Fail to response to FDL request and does not generate FDL data
3458     MAX rejects CBCP callback when turn on CLID auth
3474     IP Pool Leak
3523     Max Stacking failed to bind channel by a specific broadcast packet
3557     SNMP resets places a warning 176 before reseth
3561     Max on 6.1.0 reboots (resets) with Fatal Error 1 (FE 1)
3567     SNMP Reboot Trap logs misleading information
3580     Max constantly rebooting with FE1
3751     Invalid entries in "show users" output for stacked calls
250121   IP pool leak if there are no gaps between pool ranges
250249   After a period of time Max Stops routing packets to dial-up P50s
250289   Max 4000 incorrectly interprets TCP-Clear packets as Async-PPP
258594   Maximum of 59 DTPT ZGR out


The 7.0b0 beta software for the MAX family contains the following:

Features:
  Description  
* ISDN BRI "U" interface Network Card for MAX400x
* AO/DI (Always On / Dynamic ISDN)
* Suppress Host Route Advertisement/ dial out record  Enchantment 
* Request for DHCP and NAT on the Multiband MAX 6000
* After radius auth, return attribute 18 back to PPP dialin client
* 4BRI version of MAX1800
* KR2 for Czech Republic
* R2 CLID processing added for India
* Add security profile attribute to connection profiles
* Add two new options to the TSAVE command
* Add Reverse Tunnel NAT capability to IPsec
* MultiVoice: Addition of DTMF tone generation on the Motherboard DSP for VOIP
* MD5 authentication for OSPF (RFC2178)
* SNMP: MAX must report terminating shelf/slot/item in accounting records
* MultiVoice: Make VOIP feature available on MAX2000 platform
* MultiVoice: VOIP ANI (a.k.a CLID) feature
* SNMP:  Allowed NAS Port ID format to be GET/SET via SNMP
* Need SNMP MIB for ATMP
* SNMP Service Management MIB implementation
* Type of service support
* MAX 200: Reassignable status menus

Rockwell code versions:

Series56 Digital Modem Modules support Rockwell 2.084 firmware. 
V.34 Digital Modem Modules support version 1.610G19. 
Rockwell 2.084 firmware supports v.90, K56flex, K56plus, and all slower,
standard modem speeds.


Notice of discontinuance:

Software support for V.34 modem slot cards will be phased out of new TAOS
code releases beginning with TAOS 7.1.  The last TAOS release to contain
software support for V.34 slot cards for the MAX family is TAOS 7.0.

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>