Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) SNMP Radius Server Change
I've run into the following problem: The radius server information
returned by snmp does not correspond to those listed in Radius-Stas. In
other words, I see this from snmp:
radAuthCurrentServerFlag.1 : current
radAuthCurrentServerFlag.2 : standby
radAuthCurrentServerFlag.3 : standby
While I get this from the TNT:
[in RADIUS-STATS]
current-auth-server = 3
current-acct-server = 1
This is happening on two different TNT's, one running 2.1.3 and the other
2.1.9. I am using the latest posted MIB (Release-980624) on Ascend's FTP
site.
No matter what changes I make in RADIUS-STATS, they are never reflected by
snmp. If I make a change by snmp, then snmp will show that change, but it
is never shown in RADIUS-STATS, and TNT does not start sending radius
requests to a different machine.
I can only conclude that RADIUS-STATS on the TNT is authoritative, and all
values returned by snmp or changes made via snmp for radius servers are
invalid. Oddly enough, if I change the ip address of one of the three
listed servers in ESTERNAL-AUTH, then that change DOES show up in snmp.
Only RADIUS-STATS/CurrentServerFlag seem to be a problem.
Is anyone else seeing this problem? Is anyone able to make this
work via snmp?
------------------------------------------------------
| Lee Nelson |
| lwn@iwbc.net |
|----------------------------------------------------|
| Network Administration, IWBC ISP Services Inc. |
| Voice: (425)290-1800 Fax: (425)290-1751 |
| 8625 Evergreen Way, Suite 215, Everett, WA 98204 |
| http://www.iwbc.net |
------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>