Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LQM In 6.1.7 (ASCEND)
Following up on this:
>From: Peter Lalor <plalor@infoasis.com>
>>Was the LQM problem corrected in 6.1.7? I'm wondering if I should leave it
>>switched on when I upgrade or would be better served turning it off . . .
>
>I don't know. I don't run any dial-up into our 4000 anymore; we moved all
>that to a TNT. I assume that TNT 2.1.9 is pretty much Max 6.1.7, and I
>haven't upgraded from 2.1.3 yet.
>
>The LQM problem Ascend knew of, TR2288, was fixed in 2.1.0 according to the
>release notes. I tried LQM with 2.1.0 at the time, and found that it was
>still broken. I reported that to Ascend, referring to the ticket I still
>have open on the issue.
>
>When I saw that neither the 2.1.3 or 2.1.9 release notes made mention of
>any LQM fix, I got worried and started persuing it again. I am once again
>actively working with Ascend on the issue. They are currently attempting to
>reproduce the problem with the specific devices that we experienced the
>problem with, which was Pipeline 15s and 25s, and Netopia ISDN routers.
>
>The specific problem we had was that these devices would be immediately
>disconnected, and then again try to reconnect only to be disconnected
>continuously. You could occasionally get a packet through...
>
>We're about to try LQM again under 2.1.3. I'll let y'all know.
Ascend has reproduced the problem under 2.1.3 and 2.1.9 with Netopia
routers. It isn't fixed. No word yet on P15s and 25s.
Peter Lalor Infoasis
plalor@infoasis.com http://www.infoasis.com/
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>