Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) Pipeline 220 - Very slow

Checked that, no Proxy is active.  Just one Ethernet port is being used, no
Proxy or NAT.


Scott Page
Director of Network Operations
UltimateCom, LLC.
4643 S. Ulster St.  Suite 1450
V303.713.1975
F303.713.9294
e-mail scott@ultimateis.com <scott@ultimateis.com> 
Web www.ultimateis.com <www.ultimateis.com> 

		-----Original Message-----
		From:	Gordon Mackenzie [mailto:gmackenz@ascend.com]
		Sent:	Wednesday, September 09, 1998 11:38 AM
		To:	Scott Page; ascend-users
		Subject:	RE: (ASCEND) Pipeline 220 - Very slow

		By default, pipelines have Proxy Mode enabled in the
Ethernet/Mod
		Config...

		You might try turning it off it is enabled.

		> From: Scott Page <scott@ultimateis.com>
		> Date: Tue, 8 Sep 1998 16:25:38 -0600 
		> Subject: RE: (ASCEND) Pipeline 220 - Very slow
		> 
		> No firewall installed.  We are running bare bones with
just one Ethernet
		> port active (for testing).  I have eliminated any extra
devices that I
		> thought might effect traffic and conflicts.  It is setup
exactly as our
		> PL130.
		> 
		> Scott Page
		> Network Operations
		> UltimateCom, LLC.
		> 4643 S. Ulster St.  Suite 1450
		> V303.713.1975
		> F303.713.9294
		> e-mail scott@ultimateis.com <scott@ultimateis.com> 
		> Web www.ultimateis.com <www.ultimateis.com> 
		> 
		>                 -----Original Message-----
		>                 From:   Peter Lalor
[mailto:plalor@infoasis.com]
		>                 Sent:   Tuesday, September 08, 1998 4:12
PM
		>                 To:     Scott Page
		>                 Cc:     ascend-users@max.bungi.com
		>                 Subject:        Re: (ASCEND) Pipeline 220
- Very slow
		> 
		>                 >From: Scott Page <scott@ultimateis.com>
		>                 >>>My company has been happily using a
Pipeline 130 for
		> about 8 months.  It is
		>                 >>>connected to a fractional 512k T1 Frame
Relay line.  We
		> recently purchased a
		>                 >>>Pipeline 220 about 2 weeks ago (we are
splitting our
		> network for web servers
		>                 >>>and secure internal network.
Everything on the 220 runs
		> great for about
		>                 >>>15min, then only pings and e-mail go
through.  HTTP, FTP
		> and other protocols
		>                 >>>are very slow.  SMTP mail is still as
fast as it has
		> been.  I have tried
		>                 >>>about every version of firmware.  Even
if I only use one
		> of the Ethernet
		>                 >>>ports, the 220 slows to almost a stop.
Ascend nor my ISP
		> have figured this
		>                 >>>out yet.  I have sent a trace to Ascend
support using the
		> wann 64 and wano
		>                 >>>64 commands in diag.  If anyone has any
suggestions I
		> would appreciate it
		>                 >>>immensely.  I have a deadline to get
this box working by
		> Sept. 15th 1998.
		>                 >
		>                 >>Make sure you aren't filtering ARP on
the Ethernet. Just
		> an idea.
		>                 >>
		>                 >>http://www.ascend.com/696.html covers
it.
		>                 >
		>                 >I have no filters set
		> 
		>                 Sounds like an ARP problem to me, due to
the dying-off after
		> some time. Are
		>                 you running proxy ARP on more than one
device? You say you
		> have a "secure
		>                 internal network". What's securing it?
Perhaps a firewall is
		> interfering?
		>                 Have you looked at traceroute?
		> 
		>                 Etc., etc.
		> 
		>                 Peter Lalor           Infoasis
		>                 plalor@infoasis.com
http://www.infoasis.com/
		> ++ Ascend Users Mailing List ++
		> To unsubscribe: send unsubscribe to
ascend-users-request@bungi.com
		> To get FAQ'd:   <http://www.nealis.net/ascend/faq>

		-- 
		$$$/\$$$   Gordon Mackenzie                         (510)
747-2790
		$$/  \$$   Software Test Engineer < Engineering < Alameda <
Ascend
		$/ () \$   mailto:gmackenz@ascend.com
http://www.ascend.com
		/      \           "Ave, Ascend, probaturi te salutamus"
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>