Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) 3com Impact ISDN modems and 4048 compatibility.
Our 3 Maxens are configured as such:
6.1.3 software
stacking = on
IP only
Ascend Radius Authentication
Its a pretty basic setup, no OSPF or RIP is active. The majority of our
connections are set for an Idle limit of 4 hours, and it works real well if
the users have a good connection to us. We have a few clients we have setup
for dialup ISDN. Two of them are using the 3 com Impact ISDN modems, and
are having trouble connecting the other channel. The IMPACT boxes dial over
and over until finally they connect.
The profile in our Radius config is this:
username Password = "password"
User-Service = Framed-User
Framed-Protocol = MPP
Ascend-Idle-Limit = 1440
Our other customers seem to work fine with this configuration for dialup
ISDN. But I may be missing something here.
The 3-Com Info:
3-com Impact ISDN
firmware 3.0
software 3.11
If anyone has a few suggestions or answers as to why this particular ISDN
box will not fully connect, I would be grateful.
------------------------------------------------------------------------
---------------------------------------
William Roberts / IntelliSTAR
Intellistar Network Administrator / www.intellistar.net
willr@intellistar.net / Full Service Provider
------------------------------------------------------------------------
---------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>