Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Starting automatically AAC with parameters on NT4.0
This is provided from the Access Control product manager:
*****************************************
To configure the registry,
Run regedit
The "ImagePath" entry for HKEY_LOCAL_MACHINE >> SYSTEM >>
CurrentControlSet >> Services >> RadiusSrv in the registry currently is
"c:\Ascend\AccessControl\bin\radiusd.exe"
Change this to include the parameters
"c:\Ascend\AccessControl\bin\radiusd.exe <parameters>"
Manish Mehta
Access Control Product Manager
*********************************************
Regards,
Peter Eicher
NavisAccess Marketing Manager
> -----Original Message-----
> From: owner-ascend-users@max.bungi.com
> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Tom Wagoner
> Sent: Wednesday, October 14, 1998 12:31 PM
> To: Herve BRUNET; ascend-users@bungi.com
> Subject: RE: (ASCEND) Starting automatically AAC with parameters on
> NT4.0
>
>
> Use Regedit and go to the following...
>
> My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Ascend
> Communications\AccessControl
>
> There you can modify the Startup Parameters.
>
> Make sure you make a backup your registry before making changes!!!
>
> Tom Wagoner
> System Administrator
> WaveOne Communications, LLC
>
> > -----Original Message-----
> > From: owner-ascend-users@max.bungi.com
> > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Herve BRUNET
> > Sent: Wednesday, October 14, 1998 8:09 AM
> > To: ascend-users@bungi.com
> > Subject: (ASCEND) Starting automatically AAC with parameters on NT4.0
> >
> >
> > Hi folks,
> >
> > I'd like to start AAC running on NT4.0 with special parameters in the
> > command line. BUT ... NT does not store these parameters so then you
> > want AAC to start automatically at NT boot up, the parameters are not
> > taken into account... I was told that there are some useful registers
> > to set up in the registry in order to store startup parameters.
> >
> > I don't know anything about these registers. Any clues...
> >
> > Any help would be appreciated.
> >
> > Thanks,
> >
> > ---
> > Herve Brunet Pre-Sales Engineer
> > Tel : 01 30 48 83 84 DYNETCOM
> > Fax : 01 30 48 83 40 Bat GAIA, 9 parc Ariane
> > 78284 Guyancourt cedex
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: