Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) P50 and Cisco 2503 via ISDN
Hello all,
We are trying to connect a P50 and Cisco 2503 with ISDN. Cisco dials into
p50 and disconnects right away. Here are our settings.
P50 Setting:
Configure...
>Switch Type=NTI
Chan Usage=Switch/Switch
My Num A=213xxxxxxx
My Num B=213xxxxxxy
SPID 1=213xxxxxxx00
SPID 2=213xxxxxxy00
BRI Analog Encode=SwitchType
Ans Voice Call=No
My Name=p50
My Addr=aaa.aaa.aaa.181/25
Rem Name=cisco
Rem Addr=bbb.bbb.bbb.225/27
Dial #=zzzzzzz
Route=IP
Bridge=No
Send Auth=None
Send PW=N/A
Recv Auth=PAP
Recv PW=****
20-101 cisco
x Ip options...
>LAN Adrs=bbb.bbb.bbb.225/27
WAN Alias=ccc.ccc.ccc.5
IF Adrs=ccc.ccc.ccc.6/29
Cisco 2503 Setting
hostname msit
username cisco password <encrypted>
isdn switch-type basic-dms100
interface Ethernet 0
ip address bbb.bbb.bbb.225 255.255.255.224
interface bri 0
ip address ccc.ccc.ccc.5 255.255.255.248
isdn spid1 323ppppppp0101 ppppppp
isdn spid2 323ppppppq0101 ppppppq
dialer load-threshold 128
ppp multilink
encapsulation ppp
ppp authentication pap
dialer map ip ccc.ccc.ccc.6 name cisco 1213xxxxxxx
ip route 0.0.0.0 ccc.ccc.ccc.6
The cisco dials into the p50 and the p50 sees it coming in. But the call
disconnects right away. Each b channel settings are 64 at both end.
Any suggestions?
Thanks in advance,
Laurent Kim
NetroPlex
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>