Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) CORRECTION: 2.1b2 for MAX TNT
Additions to the previous email;
Add the following TRs:
* TR 3151 FE-2 on shelf controller.
* TR 3191 Frame Relay PVC could become inactive under heavy load.
* TR 250276 The SWAN card did not pass POST in an earlier beta release.
* FE-1 when VRouter profiles were deleted.
* Shelf did not free RADIPAD addresses if a slot card went down.
* FE-1 after deleting IP-Interface profiles and resetting the Ethernet-II
card.
* A Gateway Home Agent forwarding IPX to a Home Router did not always work.
Add the following features:
* FEAT 509586 R2 CLID processing (Brazil)
* FEAT 509590 R2 CLID processing (Argentina)
* New modulation setting for Rockwell V.90
* Half-duplex support for 100BaseT port on the Ethernet-II card
The Rockwell code version should read:
* V.90: V2.084-K56_DLP_CSM
Kevin Smith Ascend Communications...
Customer Satisfaction ...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: