Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Losing radius server
Here are some ideas that may help:
Have you tried 'show routes' or 'traceroute' on the Max?
Maybe one of the dial-up users is using the IP.
How about 'arp -a' on the NT box?
Are you using a hub or a switch to connect the two together?
Steve LaDuke.
> -----Original Message-----
> From: Dwyer, John [SMTP:JTD1@pge.com]
> Sent: Tuesday, May 12, 1998 12:51 PM
> To: 'Ascend-Users'
> Subject: (ASCEND) Losing radius server
>
> Hi,
>
> I've got a Max-1800 running 5.0Ap38, and am running RadiusNT to
> authenticate
> users.
>
> Everything seems to have been working fine for months, with no
> changes.
>
> Now I'm having a problem where the Max is apparently no longer
> communicating
> with the Radius server. Syslog messages show that I'm getting Radius
> client
> timeouts.
>
> The Radius server seems operational, and is available via ping to
> other
> devices on the network. It can also ping them, including the Max.
>
> The only problem is that the Max-1800 is unable to ping the Radius
> server
> (via termserv). However, it can ping virtually any other device.
>
> The Radius server, Max-1800 are both on the same ethernet subnet,
> served by
> the same gateway router. A "show arp" off the Max shows the correct
> bridge
> address for the radius server.
>
> Any ideas?
>
> thanks,
> john dwyer
> jtd1@pge.com
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to
> ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>