Re: (ASCEND) caller id on PRI

To: "George E. Navas" <navas@bayarea.net>
Subject: Re: (ASCEND) caller id on PRI
From: Matt Holdrege <matt@ascend.com>
Date: Wed, 25 Mar 1998 15:14:08 -0800
Cc: ascend-users@max.bungi.com
In-Reply-To: <Pine.NEB.3.96.980325150512.25087B-100000@baygate.bayarea.net>
Sender: owner-ascend-users@max.bungi.com

At 03:07 PM 3/25/98 -0800, George E. Navas wrote:
>
>I was wondering if anybody knows if there is an option that I need to 
>turn on the Max4004 that enables caller id on the pri. It appears that
>when our PRI makes a call to somebody else they do not see our number.
>Pacbell has informed that they have it enabled, and that perhaps
>I don't have the Max option enable. However, I looked in the manual and
>can't seem to find anything that turns this feature on. 

This is totally up to telco. It has nothing to do with the Max. The serving
switch generates this CLID. It receives the CLID info from the sending
switch. Perhaps PB thinks the Max is a PBX?

Matt Holdrege		http://www.ascend.com	matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

References:

(ASCEND) caller id on PRI

From: "George E. Navas" <navas@bayarea.net>

Prev by Date: Re: (ASCEND) caller id on PRI
Next by Date: Re: (ASCEND) Comapq PC with AT&T modem
Prev by thread: (ASCEND) caller id on PRI
Next by thread: Re: (ASCEND) caller id on PRI
Index(es):
- Main
- Thread