Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) snmp query of digital calls
Matt is correct, you need 6.0 for that variable; it was available in an incremental of 5.0 - I'm not sure which one.
ken
-----Original Message-----
From: Matt Holdrege [SMTP:matt@ascend.com]
Sent: Tuesday, March 03, 1998 8:43 AM
To: Joe Pautler
Cc: Ascend Mailing List
Subject: Re: (ASCEND) snmp query of digital calls
At 11:11 AM 3/3/98 -0500, Joe Pautler wrote:
>I have a Max4048 running 5.0Ap42. I am trying to use SNMP to query the
>unit every 5 minutes or so, to determine the number of analog callers,
>and the number of digital (ISDN) callers. I have the analog stuff working
>fine, but am having trouble with the digital callers. Do any of you
>currently use SNMP queries to determine the number of ISDN callers?
>
>I would like to use the following mib variable, from the call.mib, but
>it returns absolutly nothing. (I verified that with a traffic capture...
>so it's not a problem with my snmp program)
>
> callCurrentDigitalIncoming OBJECT-TYPE
> SYNTAX INTEGER
> ACCESS read-only
> STATUS mandatory
> DESCRIPTION "The number of current digital incoming calls
> is returned."
> ::= { callStatusGroup 7 }
>
>It should be OID .1.3.6.1.4.1.529.11.7
>
>Is this variable not supported by my Max/firmware?
I'm not sure, but I think you may need to run 6.0 for that MIB.
Matt Holdrege http://www.ascend.com matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>