Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 2.1.3e13 on TNT...
Todd A. Blank wrote:
>
> TNT Configured as follows:
>
> Shelf 1 ( standalone ):
> { shelf-1 slot-1 0 } UP t3-card
> { shelf-1 slot-2 0 } UP 192hdlc-card
> { shelf-1 slot-3 0 } UP 48modem-56k-card
> { shelf-1 slot-4 } OCCUPIED
> { shelf-1 slot-5 0 } UP 48modem-56k-card
> { shelf-1 slot-6 } OCCUPIED
> { shelf-1 slot-7 0 } UP 48modem-56k-card
> { shelf-1 slot-8 } OCCUPIED
> { shelf-1 slot-9 0 } UP 48modem-56k-card
> { shelf-1 slot-10 } OCCUPIED
> { shelf-1 slot-11 0 } UP 8t1-card
> { shelf-1 slot-12 0 } UP 192hdlc-card
>
> Getting the following errors:
>
> LOG error, Shelf 1, Controller, Time: 15:08:29--
> Slot 1/12, timeout failure code=0 during TIMEOUT
>
> LOG error, Shelf 1, Slot 12, Time: 15:10:26--
> Can't read debug profile for 1/12
>
> LOG error, Shelf 1, Slot 12, Time: 15:25:04--
> IP pool address recovered ipaddress <209.190.33.99> leaked <Thu Jul 23
> 15:24:23 1998>
>
> Has anyone seen this? Other than this, the box has been stable under
> 2.1.3e13. The problem I posted earlier with the dropping d-channels is
> solved by this load. v.90 seems to work pretty well. I see a few 50k+
> analog connections, and lots of them in the 40k - 50k range.
>
> Just thought I would post the update I promised everyone.
>
> Thanks,
>
> Todd A. Blank
> Columbus NAP, Inc.
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
yes,
this mean the hdlc card just reset it self.
its a known problem and there is a TR open on it.
look at the fatal error to see if it error code 15.
Asaf Homsky.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: