Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) P75 Second Channel Comes Up/Drops TOO Fast - "Add Pers" Ignored
At 12:47 PM 7/16/98 -0700, Rylan Luke wrote:
>I have a P75, Running Rev 6.1.0. I am connecting to an Ascend
>router, at least my new ISP says so. My problem is this: the
>second channel seems to come up as soon as the "Target Util"
>number is acheived; the "Add Pers" parameter is ignored. Also, as
>soon as the ALU drops below the "Target Util" number, the second
>channel is dropped; the "Sub Pers" number is ignored.
>
>This makes for a lot of unwanted connects and disconnects on the
>second channel.
>
>I have both "Add Pers" and "Sub Pers" set to 30 seconds, which
>should cause the unit to wait this long before adding and dropping
>a channel.
>
>This setup was working with my old ISP, but not with the new one.
>Same behavior occurs whether I use "MPP", or "MP" with BACP
>enabled. Any ideas?
Your ISP may have the add/drop parameters set on their side to drop/add
immediately. Both ends can make the request, and there is no way to force
your end to be in control in such a case....
Kevin Smith Ascend Communications...
Customer Satisfaction ...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: