Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Making Shotgun work
I've set them up with MPP, and Ascend-Maximum-Channels=2.
(on Maxes, 6.1.x).
Larry Rosenman
Here is a RADIUS entry that works:
username Password = "UNIX"
User-Service = Framed-User,
Framed-Protocol = MPP,
Framed-Routing = None,
Framed-Address = 255.255.255.254,
Framed-Netmask = 255.255.255.255,
Framed-MTU = 1500,
Ascend-Idle-Limit = 2100,
Framed-Compression = Van-Jacobsen-TCP-IP,
Ascend-TS-Idle-Limit = 2100,
Ascend-TS-Idle-Mode = TS-Idle-Input-Output,
Ascend-Maximum-Channels = 2
--
Larry Rosenman, Sr. System Administrator, CyberRamp Internet Services
E-Mail: ler@cyberramp.net, http://www.cyberramp.net
Voice: (214) 343-3333/(817) 461-8484 (Metro)/Fax: (214) 343-3727
Technical Support: (214) 340-2020/(817) 226-2020 (Metro)
U.S. Mail: 11350 Hillguard Rd, Dallas, TX 75243-8311
-----Original Message-----
From: owner-ascend-users@max.bungi.com
[mailto:owner-ascend-users@max.bungi.com]On Behalf Of David S. Langlands
Sent: Friday, July 10, 1998 11:07 AM
To: ascend-users@bungi.com
Subject: Re: (ASCEND) Making Shotgun work
Jim and Tony,
according to the folks at Diamond, MP works with Analog modems
on a TNT. They claim that they are using TNT's with 2.x in
their own office and it works fine. I am waiting for my eval
so I can test it with my TNT 2.1.3's. I'll post my results
when I can get 'em.
I've got both CT1's and PRI's, so I should be able to test
Tony's problem too. BTW -- the Shotgun uses MP, not MP+,
correct? Anyone know?
Regards,
Dave
--
David S. Langlands Chief Technologist USS .net
dsl@uss.net (312)655-1900 http://www.uss.net
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: