Re: (ASCEND) setting the RADIUS accounting server via SNMP

["Kevin A. Smith" <kevin@ascend.com>]

At 09:33 PM 7/6/98 -0400, Joe Pautler wrote:
>John Coy wrote:
>]
>]Is there a way to set the value of the RADIUS auth server via
>]SNMP?  If so, what is the OID for that value?  Thanks in advance.

These are read-only fields.

>% snmpwalk -v 1 128.205.200.74 netop .1.3.6.1.4.1.529.13.3.1.11
>enterprises.529.13.3.1.11.1 = IpAddress: 128.205.200.3
>enterprises.529.13.3.1.11.2 = IpAddress: 128.205.1.16
>enterprises.529.13.3.1.11.3 = IpAddress: 0.0.0.0
>
>Shows the radius servers
>
>==========================================
>
>% snmpwalk -v 1 128.205.200.74 netop .1.3.6.1.4.1.529.13.3.1.12
>enterprises.529.13.3.1.12.1 = 2
>enterprises.529.13.3.1.12.2 = 1
>enterprises.529.13.3.1.12.3 = 1
>
>2 = current primary server  1 = standby server

You can set these, to change which server is active/standby.


Kevin Smith			Ascend Communications...
Customer Satisfaction	...where Network Solutions never end.

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

References:

• (ASCEND) setting the RADIUS accounting server via SNMP
• From: Joe Pautler <pautler@grasshopper.cit.buffalo.edu>

---

• Prev by Date: (ASCEND) Problem Getting Radius Stop Records....
• Next by Date: Re: (ASCEND) setting the RADIUS accounting server via SNMP
• Prev by thread: (ASCEND) setting the RADIUS accounting server via SNMP
• Next by thread: (ASCEND) DBM(gdbm), and default clause
• Index(es):
  • Main
  • Thread