Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Multilink PPP on TNT and Maxen...
>At 02:07 PM 8/20/98 -0400, Joe Bowers wrote:
>>(this affects both analog & digital) and you needed to change the Ascend
>>Maximum Channel attribute to 2 (or more) for mulit-channel calls.
At 15:51 1998/08/20 -0700, Kevin A. Smith wrote:
>Or remove any explicit restrictions. The default will allow multi-channel
>calls - setting the above parameter to 2 will explicitly limit the session
>to 2-channels.
If the configuration on the Max or TNT is like mine,
with "Use Answer as Default=Yes" and "Max Ch Count=1" in the "Answer" profile
then you will need something in the Radius profile to raise the limit.
Example from my working Maxen:
Ethernet->Answer->Use Answer as Default=Yes
Encaps->MPP=Yes
MP=Yes
PPP=Yes
PPP options->BACP=Yes
Min Ch Count=1
Max Ch Count=1
Mod Config->Shared Prof=No
Radius:
JoeMPUser Password = "MySecretStuffHere"
User-Service = Framed-User,
Framed-Protocol = MPP,
Ascend-Assign-IP-Pool = 1,
Ascend-Maximum-Channels = 2,
Ascend-Idle-Limit = 600
If you want the user to be able to login more than one seperate session,
but using the same Login ID add:
Ascend-Shared-Profile-Enable = Shared-Profile-Yes,
-Jim H
----
Jim Howard Sr Network Engineer Lyceum Internet
jhoward@lyceum.com http://www.lyceum.com/ 404.248.1733
My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
Fingerprint: 7E8B E2BA 1314 2535 CB08 CFF9 119B 7CD3 2488 954D
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>