Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Multilink PPP on TNT and Maxen...
Todd: Are you referring to Analog MP/MP+ ? I assume this by the various
modem brands and NT RAS capability of this that you refer to. I do believe
that is supported in some version of TNT Code. I am also sure that you
know we have always supported MP/MP+ for digital calls on all MAX product
including the TNT. I believe when I worked with you a while back we had
your setup your default Radius profiles to allow only a single channel
(this affects both analog & digital) and you needed to change the Ascend
Maximum Channel attribute to 2 (or more) for mulit-channel calls.
--Joe
At 12:28 PM 8/20/98 -0700, Kevin A. Smith wrote:
>At 11:08 AM 8/19/98 -0400, Todd A. Blank wrote:
>>I have multiple users trying to do Multilink PPP to my TNT and Maxen.
>>The Maxen are running 6.1.7 and the TNT is running 2.1.3e13. The
>>clients are using everything from Multitech and Diamond to NT RAS.
>
>Pipelines?
>
>>I have tried every conceivable RADIUS profile configuration. All these
>>Boxen authenticate through AAC running on BSDi.
>>
>>Here is my question:
>>
>>Does Multilink PPP work on Ascend products?
>
>That must be a trick question....we have been doing MP since way before
>there was even an MP RFC. I personally call into a MAX6000 *every* day
>with MP connections (Pipeline 85).
>
>>After my experience, I sure
>>don't think so... If it does, can somebody please provide me with the
>>necessary attributes for my AAC/RADIUS profiles to get it working? I am
>>gathering a list of very angry customers...
>
>Did you disallow MP in the configuration on the MAX/TNT - it is enabled
>by default.
>
>In RADIUS, you can actually use the same profile for PPP and MP(+) calls
>since there is no restriction to single-channel or PPP unless you
>explicitly set
>it in the MAX/TNT or RADIUS.
>
>>I would really like an official answer from Ascend on this issue - which
>>I have never had, even though I have repeatedly asked.
>
>Sorry if I've missed the question in the past.
>
>Yes it is supported. We were one of the first to support MP in fact.
>
>Maybe we need to see your configuration to figure out what could be causing
>your problems.
>
>
>Kevin Smith Ascend Communications...
>Customer Satisfaction ...where Network Solutions never end.
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: