Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 6.1.3 Upgrade Problem
LQM is off, I loaded the restricted version first then the full version of
6.1.3. The problem is that when the customers router disconnects the MAX
seems to keep the connection up even thou they are disconnected. So when
they go to relog back in they are getting rejected because they are taking
to many channels. So i have to go in and by disconnect all of their
sessions by hand.
Chris Edwards
President
Voyager Online, LLC
chris@vol.com
http://www.vol.com
800-864-0442
423-209-2929
On Wed, 12 Aug 1998, Kevin A. Smith wrote:
> Date: Wed, 12 Aug 1998 14:51:20 -0700
> From: "Kevin A. Smith" <kevin@ascend.com>
> To: Chris Edwards <chris@vol.com>
> Cc: Ascend User-Group <ascend-users@bungi.com>
> Subject: Re: (ASCEND) 6.1.3 Upgrade Problem
>
> At 12:00 PM 8/12/98 -0400, you wrote:
> >I have taken the big leap from 5 to 6.1.3 on my max 400x's and now I have
> >several dedicated connections who cannot stay connected for more than a
> >few seconds via ISDN. Any suggestions?
>
> >From 5 to 6.1.3 is a pretty big leap....I presume you followed the recommended
> steps between the two?
>
> I would probably take a look through your configuration to see if anything
> may have changed unexpectedly? Do you use RADIUS for authentication - and do
> you see any failed authentications?
>
> Any other clues : do non-dedicated ISDN sessions work? Analog sessions?
>
>
> Kevin Smith Ascend Communications...
> Customer Satisfaction ...where Network Solutions never end.
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: