Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) RE: Uh Oh . . .
!
Really? I thought it was pretty clear, moreso the first time around than
the message below, but reasonably straightforward none the less. I also got
the impression that a lot of other folks were seeing very similar symptoms?
I'm certainly open to suggestions though. Let's say I get the benefit of
the doubt and I'm not a moron. Of the dozens of possible causes, which
might be the most obvious for me to consider? Or, better still, perhaps
there are debug monitor commands I could use on the Max to observe details
of the connection failure? Believe me, I'd love to blame it on the user's
modem configuration at this point . . .
M
> -----Original Message-----
> From: Matt Holdrege [SMTP:matt@ascend.com]
> Sent: Monday, August 10, 1998 4:30 PM
> To: Lynch, Mark
> Cc: ascend-users@max.bungi.com
> Subject: Re: Uh Oh . . .
>
> Sorry, I can't answer vague questions very well. Dozens of things could be
> causing your problem. It's needs a lot more debugging.
>
> At 01:15 PM 8/10/98 -0400, Lynch, Mark wrote:
> >
> >Matt,
> >
> >Silence is the scary part and I haven't heard your opinion on this yet.
> >Should I be worried?
> >
> >-----------------------------------------------------
> >Mark:
> >
> >This problem exists all over the board, even up to IDSL switched MP
> >connections via Max TNT and Pipelines.
> >
> >I've heard nothing concerning a fix.
> >
> >-Tom
> >
> >>For the Ascend boys (Matt, et al) specifically:
> >>
> >>Gentlemen,
> >>
> >>On my very simple, whitebread Max 4K I've got a recurring insidious
> problem
> >>with analog PPP connections losing their network connectivity. The line
> >>stays up, but the TCP/IP just "goes away". Sometimes it comes back
> after a
> >>few minutes, sometimes the user has to start over.
> >>
> >>Thanks to Peter Lalor for clueing me in about LQM. Turning that on (I
> >>haven't made the jump to 6.1.x yet) reduced the frequency of the
> problem,
> >>but did not eliminate it altogether. I've seen other folks here remark
> on
> >>similar symptoms in their configurations. Thanks to all, by the way,
> for
> >>sharing and offering suggestions.
> >>
> >>My question for you is this:
> >>
> >>I understand work is furiously underway on the next release of 6.1.x
> that's
> >>really going to fix a lot of things. Is my problem one of the things
> fixed
> >>in this pending (or any) release? Right now I'm at 5.0Ap51, waiting for
> >the
> >>smoke to clear in 6.1.x.
> >>
> >>I guess another way to put this same question is, "Is Ascend aware of
> and
> >>working on a solution for this problem"? Believe me, for the longest
> time
> >I
> >>thought it was pilot error, but after having read this list for a couple
> of
> >>months I'm happy (and saddened) to see it's not just me.
> >>
> >>So what do you fellows think?
> >>
> >
> >
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: