Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Backoff Q full & radstat
Hi,
Thanks for your response. Today I have find the source cause the
"Backoff Q full". I check the account detail, the content is no
problem. Then I find that the TNT's call-logging is enabled and
the host is unavailable. So when I disabled the call-logging, the
"Backoff Q full" was disappeared.
Now I have another question: Following is my TNT "radstat", and
192.168.10.2 & 3 is my authen and acct host, 10.4 is the backup host.
and 192.168.10.204 is my disabled call-logging host. I think "radstat"
give the wrong sent and rcv statistics. the 192.168.10.204 is disabled,
but its stat is still alive. Is it the bug of "radstat" ?
Have a nice day!
Ji Duanping
=====================================================
admin> radstat
RADIUS authen stats:
0 sent[A,O]=[0,200], rcv[A,O]=[0,195]
timout[A,O]=[0,5], unexp=2, bad=195, authOK=0
IpAddress 192.168.10.2, curServerFlag 1
1 sent[A,O]=[0,4], rcv[A,O]=[0,1]
timout[A,O]=[0,3], unexp=0, bad=1, authOK=0
IpAddress 192.168.10.4, curServerFlag 0
2 sent[A,O]=[0,0], rcv[A,O]=[0,0]
timout[A,O]=[0,0], unexp=0, bad=0, authOK=0
IpAddress 0.0.0.0, curServerFlag 0
RADIUS accounting stats (0):
0 sent=3, rcv=0, timout=1, unexp=0, bad=0
IpAddress 192.168.10.3, curServerFlag 1
1 sent=0, rcv=0, timout=0, unexp=0, bad=0
IpAddress 192.168.10.4, curServerFlag 0
2 sent=0, rcv=0, timout=0, unexp=0, bad=0
IpAddress 0.0.0.0, curServerFlag 0
RADIUS accounting stats (1):
0 sent=934, rcv=42, timout=933, unexp=0, bad=42
IpAddress 192.168.10.204, curServerFlag 1
1 sent=0, rcv=0, timout=0, unexp=0, bad=0
IpAddress 0.0.0.0, curServerFlag 0
2 sent=0, rcv=0, timout=0, unexp=0, bad=0
IpAddress 0.0.0.0, curServerFlag 0
Local Rad Acct Stats:
nSent[OK,fail]=[937,0], nRcv=42, nDrop[QFull,Other]=[0,1]
nRsp[TimOut,NoMatch]=[934,0], nBackoff[new,norsp]=[0,311]
nAllocFail[timer,mem]=[0,0], nTimOutNoMatch=2, nBadVect=42
Local Rad Serv Stats:
unkClient=0
index 0 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 1 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 2 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 3 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 4 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 5 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 6 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 7 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
index 8 #Sent = 0, #SendFail=0 badAuthRcv = 0, badPktRcv = 0
Tim Basher wrote:
>
> > My TNT also have this log frequently. My radius server is Ascend version
>
> Which Ascend package? Ascend Access Control (the commercial software) or
> Ascend RADIUS (the free software)?
>
> What version of the package (what is the output of "radiusd -v")?
>
> > and there are no wrong config in radius configuration I think.
>
> Have you checked the RADIUS accounting "details" file? Do you see accounting
> messages being recorded? Are you seeing any duplication?
>
> Assuming you mean Ascend RADIUS and that you are using the current version,
> have you checked the "logfile"? Are you seeing any error messages (such
> as "authenticateAcctReq: NNN: bad authenticator"?
>
> > So I wonder if this situation do any harm to my system and if I can
> > do some thing to avoid these mess.
>
> Are you using RADIUS accounting? If not, then disable it ("acct-type = none").
>
> If you are using RADIUS accounting, then
> * check the TNT configuration.
> + Does the acct-server-1 address match your accounting server?
> + Does the acct-port match your accounting server (1646 by default)?
> + Does the acct-key match the secret in the clients file entry on your server?
> + If you are using the same RADIUS server for authentication, then the
> acct-key should also match the auth-key.
> + Do you have the acct-timeout set to a reasonable value?
> * check to see the RADIUS server is reporting errors.
> If it is, then what are the error messages?
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
--
Have a nice day! Ji Duanping
mailto:jidping@public.east.cn.net
mailto:jidping@mail.263.net.cn
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: