Yes, D channel signalling is detected and some of the 2 channel calls connected use the first B channel from each ISDN line, and other calls use both of the B channels from the first line. > >> Far side is a Max >>4000. Radius authentication is being used with no channel limit in the >>radius profile, and 4 channel maximum set in the Answer profile on the Max. > >So I assume you are getting 2 channels up so far... Yes. > >>Various settings in the Encaps options have been tried for Min/Max and Base >>channel counts, none of which seem to help. Load threshold is set at 10% to >>try to force an additional channel to be added and the CLU definitely gets >>above the threshold for extended periods, yet no additional channels are >>added. No dial attempt is even made. > >When set to base-channel-count = 4 what happens ? I get a 2 channel call completed with a Lan Session up and then no additional channels attempt to dial. > >>Any insight is appreciated, > >Maybe we need to get some debug output from this, if no-one else suggested >anything that works. I would imagine tech support will want you on the latest >available released software version to rule out any fixes that occurred since >the 4.6C version....is that feasible? > A code upgrade would be OK. If you know of a good code rev for the 400 ( as few bugs as possible please ) let me know. I doubt code has been developed in the 5.0 range for the 400, so I assume it will still be 4.6C something. > >Kevin > > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <HR> <STRONG>Follow-Ups</STRONG>: <UL> <LI><STRONG><A HREF="msg09168.html">Re: (ASCEND) Pipeline 400</A></STRONG></LI> <UL> <LI><EM>From</EM>: Kevin Smith <kevin@ascend.com></LI> </UL> </UL> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg09111.html">(ASCEND) V.35 port on MAX</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg09110.html">(ASCEND) MAX200 / PCMCIA Modems</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg09095.html">Re: (ASCEND) Pipeline 400</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg09168.html">Re: (ASCEND) Pipeline 400</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail3.html#09109"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd179.html#09109"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>