walter thanks in advance > From owner-ascend-users@max.bungi.com Mon Sep 22 11:12 EDT 1997 > From: "Gleb Gornostayev" <gleb@quarta.net> > To: <ascend-users@max.bungi.com> > Subject: (ASCEND) Q931 debug on Maxen? > Date: Mon, 22 Sep 1997 16:59:39 +0400 > X-Priority: 3 > X-Msmail-Priority: Normal > X-Mimeole: Produced By Microsoft MimeOLE Engine V4.71.1008.3 > > Hello, All! > > I have a question about MAX4000, MAX2000 and so on. I need the following: > the ability to see all the Q931 messages on D-channel in E1 DSLs. I need it > for debug purposes, and also to debug the handshaking between Maxen and > Telco switches. I tried to find the debug-mode command by using 'help > ascend' command, but I didn't find the required command. The 'PriDisp <n>' > gives me the hex codes of the D-channel, but I want to see the decoded Q931 > messages. Is this possible? > Now I must use the very expensive E1 analysers to solve my problems, but > every MAX uses the E1 DSL drivers to communicate with Telco switch. I think > that there is a good reason for embedding the Q931 message decoder in Ascend > firmware to help people in solving problems. (I already use the R2 debug > commands to debug the R2 protocol, when I use installations with R2). > > (As an example of the already solved problem I can demonstrate the ISDN BRI > equipment of the different manufacturers. E.g. Asuscom ISDNLink and Intel > Proshare can give me the detailed log of the D-channel activity, already > decoded. But all this equipment works only on ISDN BRI subscriber lines, not > PRI lines). > > Thanx! > > > > Gleb Gornostayev, Manager > Quarta Networks, Inc., Moscow, Russia > <A HREF="http://www.quarta.net">http://www.quarta.net</A> > Phone +7-(095)-234-0422 > Fax +7-(095)-234-4939 > > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg08930.html">RE: (ASCEND) RE: SNMP and OS = BUG?</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg08928.html">(ASCEND) Mailing list down?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg08933.html">Re: (ASCEND) Q931 debug on Maxen?</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg08924.html">(ASCEND) MAX Loosing STATIC ROUTES</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#08929"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd171.html#08929"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>