most likely you are NAT on the ethernet interface. However you should be able to telnet to the WAN interface address. If you dont have a WAN interface address setup, you should for MANY reasons. With a Framerelay connection most likely you will have a wan interface. > > ---------------------------------------------------------------------- > > From: <mel@becknet.com> > Date: Wed, 10 Sep 97 17:08:36 -0700 > Subject: (ASCEND) Telnetting to a P130 using NAT over FR > > I've got a P130 configured to use NAT over FR (5.0Ai23). It appears to > work OK, but I can't telnet to the router from the outside world. I know > that NAT over ISDN didn't support telnet, but at least the term-serv > "remote" command worked. But this P130 connects to a Cisco via FR, and so > the remote command isn't available. I tried mapping the telnet port to > the router's IP address, but no go. > > How is one supposed to conduct remote support a P130 doing NAT over FR? > > -mel > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg08616.html">(ASCEND) Utility for detail-File</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg08615.html">(ASCEND) Telnetting to a P130 using NAT over FR</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg08627.html">Re: (ASCEND) Telnetting to a P130 using NAT over FR</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg08626.html">Re: (ASCEND) Re: Telnetting to P130 using NAT</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail11.html#08617"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd160.html#08617"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>