At 08:47 PM 9/5/97 -0400, Enrique Torres Angeles wrote:
>Hello
>
>Well in this mail I have 3 question and maybe you can help me to solve them.
>
>In this moment my TNT is running software 1.3Ap5 and have connected 4E1
ISDN/PRI
>and 1E1 R2.
>
>
>1- My first problem is with the R2 signaling. When i try to use R2
>signaling the TNT receive the call but it can't route it to the modems then
>TNT give me this message
>
>M: 354 L: info Src: shelf-1/controller
>
> [1/1/1/9] [MBID 90; -> 544361] Call rejected,
> no ports available, [56k-restricted] -> 544361
>
>I have the r2-signaling-mode enabled in the TNT, I'm running software
>version 1.3Ap5 and my E1 is configured in this way:
>
>enabled = yes
>t-online-type = none
>t302-timer = 1500
>frame-type = 2ds
>clock-source = eligible
>clock-priority = middle-priority
>signaling-mode = e1-r2-signaling
>default-call-type = voice
>switch-type = switch-cas
>front-end-type = short-haul
>channel-config = [ { unused-channel 9 "" { any-shelf any-slot 0 } 0 } {
switche+
>layer3-end = x-side
>layer2-end = b-side
>nl-value = 64
>loop-avoidance = 7
>number-complete = 7-digits
>group-b-signal = signal-b-6
>group-ii-signal = signal-ii-2
>answer-delay = 200
>caller-id = no-caller-id
>admin>
>
>
>channel-config[1] = { unused-channel 9 "" { any-shelf any-slot 0 } 0 }
>channel-config[2] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[3] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[4] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[5] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[6] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[7] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[8] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[9] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[10] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[11] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[12] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[13] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[14] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[15] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[16] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[17] = { unused-channel 9 "" { any-shelf any-slot 0 } 0 }
>channel-config[18] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[19] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[20] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[21] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[22] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[23] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[24] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[25] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[26] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[27] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[28] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[29] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[30] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[31] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>channel-config[32] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
>admin>
>admin>
>
>Do you have any idea why the TNT can not route the calls to the digital
modems ?
>
>
>2- My second problem is with the ISDN/PRI and the slip protocol. I have
>this situation when I'm connecting in the TNT in the terminal server mode
>and try to open a slip session the TNT hang up the call.
>
>this is my slip setting:
>
>admin> list slip
>slip = yes
>slip-bootp = no
>info = advanced-slip
>
>Do you have any idea about what happend here ?
>
>
>3- And finally I'm having these logs
>
>LOG error, Shelf 1, Controller, Time: 20:17:44--
> Slot 1/5, timeout failure code=0 during SEND_WATCHDOG
>
>LOG error, Shelf 1, Controller, Time: 20:17:44--
> Slot 1/7, timeout failure code=0 during SEND_WATCHDOG
>
>LOG error, Shelf 1, Controller, Time: 20:17:44--
> Slot 1/9, timeout failure code=0 during SEND_WATCHDOG
>
>LOG error, Shelf 1, Controller, Time: 20:17:44--
> Slot 1/11, timeout failure code=0 during SEND_WATCHDOG
>
>
>Do you know what can produce these kind of errors ?
>
>
>
>Thank you for your anwsers and sorry for this large mail.
>
>
> Enrique
>
>
>--
> Atentamente.
>
>
>***************************************************************************
****
>Enrique Josue Torres Angeles eta@rcp.net.pe
>Dept. de Proyectos Lima - Peru
>Dept. de Operaciones
>Red Cientifica Peruana Telefono : 51-1-9544799
>Av. Larco 770 - Miraflores 51-1-2415689
> 3er Piso Fax : 51-1-2411320
>***************************************************************************
****
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
>
Matt Holdrege - <A HREF="http://www.ascend.com">http://www.ascend.com</A> - matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<!--X-Follow-Ups-End-->
<!--X-References-->
<HR>
<STRONG>References</STRONG>:
<UL>
<LI><STRONG><A HREF="msg08387.html">(ASCEND) Problems with MAX TNT running software 1.3Ap5</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: eta@chasqui.rcp.net.pe (Enrique Torres Angeles)</LI>
</UL>
</UL>
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg08391.html">Re: (ASCEND) 56K and AP23..</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg08394.html">Re: (ASCEND) 56K and AP23..</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg08387.html">(ASCEND) Problems with MAX TNT running software 1.3Ap5</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg08388.html">(ASCEND) 56K and AP23..</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail20.html#08395"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd152.html#08395"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>