Ok, Something is strange here, I set everything according to your
descriptions below.
ascend.systemStatusGroup.sysConfigTftp.sysConfigTftpHostAddr.0 a x.x.x.x
ascend.systemStatusGroup.sysConfigTftp.sysConfigTftpFilename.0 s tim.m40
ascend.systemStatusGroup.sysConfigTftp.sysConfigTftpCmd.0 i 6
Then the box goes into a continual upgrade, It upgraded approx 3-4 times
before it will get to the command prompt.
It looks as if the MAX is not returning the box back what I would guess
would be a integer of 0. Or what ever regular run time would be.
Also durring the upgrade it doesn't respond to any snmpsets, So I can't
log a reset in there.
BUG? Or am I do this wrong?
Jason Nealis
Director Internet Operations
Network Access
Erols Internet
On Thu, 18 Sep 1997, Kenneth Packert wrote:
> This TFTP command has six options as shown.
>
> sysConfigTftpCmd OBJECT-TYPE
> SYNTAX INTEGER {
> save( 1 ), -- save configuration
> restore( 2 ), -- restore configuration
> saveAll( 3 ), -- save ALL config options
> saveMib( 4 ), -- save config w/MIB numbers
> saveAllMib( 5 ), -- save ALL config w/MIB numbers
> loadCode( 6 ) -- load a code image
> }
> ACCESS read-write
> STATUS mandatory
> DESCRIPTION
> "This variable instructs the system to perform the specified
> tftp operation."
> ::= { sysConfigTftp 1 }
>
> The reboot is:
> sysReset OBJECT-TYPE
> SYNTAX INTEGER {
> no-op( 1 ),
> reset( 2 )
> }
> ACCESS read-write
> STATUS mandatory
> DESCRIPTION "The reset takes effect after 1 minute."
> ::= { systemStatusGroup 8 }
>
> ken
> -----Original Message-----
> From: Jason Nealis [SMTP:nealis@babylon.erols.com]
> Sent: Thursday, September 18, 1997 8:43 AM
> To: John Coy
> Cc: ascend-users@max.bungi.com
> Subject: Re: (ASCEND) SNMP and OS?
>
>
>
>
> On Wed, 17 Sep 1997, John Coy wrote:
>
> > JASON!!! From your FAQ man!
> >
> :)
>
>
> > Actually, the MIB variables do exist. They are as follows:
> >
> > iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
> > ascend(529).systemStatusGroup(9).sysConfigTftp(5).
> > sysConfigTftpCmd(1)
> >
> > Where it's set value determines behavior:
> >
> > loadCode load firmware code
> > restore restore config via TFTP
> > save save config via TFTP
>
> That's my fault, I got all confused and thought the sysConfigTftpCmd was
> only for saving configurations, I was not aware of the seperate status
> codes.
>
>
>
> >
> > You set file locations and SNMP server locations using the:
> >
> > sysConfigTftpHostAddr(3)
> > sysConfigTftpFilename(4)
> >
> > I got all this worked out too but I couldn't get the damned
> > MAX boxes to reboot using SNMP. Go figure huh? Let me know if
> > you can figure out how to get them to reboot (I know the variable
> > it just doesn't do anything when I set it).
> >
> > At 05:04 PM 9/17/97 -0400, you wrote:
> > >
> > >
> > > OK, I'm was able to bang a script together that would go out and save
> > >all my configurations via tftp to my tftp server, Next challenge is
> > >to do OS upgrades via tftp. I search through the Ascend Mib and I didn't
> > >see anything in regards to OS upgrades and SNMP, BUT I know Ascend's
> > >new Navis Acess thingie will also do this, And I'm guess that it's
> > >done via SNMP, Or does it actually do some sort of expect script
> > >and step through the menu system?
> > >
> > >Summary: Do mib variables exist for me to upgrade OS's via SNMP?
> > >
> > > If so what are they?
> > >
> > >Jason Nealis
> > >Erols Internet
> > >
> > >
> > >++ Ascend Users Mailing List ++
> > >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > >To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
> > >
> > >
> >
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<HR>
<STRONG>Follow-Ups</STRONG>:
<UL>
<LI><STRONG><A HREF="msg04475.html">(ASCEND) Re: SNMP and OS = BUG?</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: John Coy <jcoy@arkansas.net></LI>
</UL>
</UL>
<!--X-Follow-Ups-End-->
<!--X-References-->
<STRONG>References</STRONG>:
<UL>
<LI><STRONG><A HREF="msg04462.html">RE: (ASCEND) SNMP and OS?</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Kenneth Packert <kpackert@ascend.com></LI>
</UL>
</UL>
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg04474.html">Re: (ASCEND) Serial WAN (v.35 port)</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg04472.html">Re: (ASCEND) Can't telnet anymore</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg04462.html">RE: (ASCEND) SNMP and OS?</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg04475.html">(ASCEND) Re: SNMP and OS = BUG?</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="maillist.html#04473"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd166.html#04473"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>