On Thu, 18 Sep 1997 phil@q1.net wrote:
> I figured out how to make 56k modems work in my own exchange but I
> am still having trouble with 56k modem out of my exchange.. Customers
> still get ASCII characters in their post dial-up terminal
> screen...Ans some just connect at 26.4 or 28.8 with 56k modems..
>
> Fixed the problem in the exchange with padding on the digital truck..
> Now looking for a fix for customers out of our exchange..
>
> Has anyone messed with the MDM Trn Level?? Could it help?? Why does
> the max Baud Rate in the Tserv section of the Ethernet ModConfig only
> go up to 33600???
The Max Baud Rate I believe will only apply to V.34 modems, Now if you
wanted to disable K56 follow the tree below:
Ethernet ---> Mod Config ---> Term Serv --> MDM Modulation = V.34 or
K56
>
> Is there a problem other than Radius with 5.0Ap20?? I know I have been getting
> strange complaints that customers have to dial 3 to 4 times to
Only problem is the in the accounting portion, logging 0.0.0.0 as framed
address
> connect or stay connected, these are from people who have 28.8
> modem.. That connected fine with the old V.34 modems in the Max
>
> I am using a Max 4000 with 8x6 56K modems with 5.0Ap20
Upgrade, The code in 5.0AP24 is much better (ROCKWELL 1.055) It should
help you with some of your connection problems.
Jason Nealis
Director Internet Operations
Internet Access
Erols Internet
> Thanks,
>
> Phil Maag
> Internet Director
> Q1.Net
> phil@q1.net
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<HR>
<STRONG>Follow-Ups</STRONG>:
<UL>
<LI><STRONG><A HREF="msg04469.html">Re: (ASCEND) slow connect rates and ..</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Darkshot <darkshot@chudys.com></LI>
</UL>
</UL>
<!--X-Follow-Ups-End-->
<!--X-References-->
<STRONG>References</STRONG>:
<UL>
<LI><STRONG><A HREF="msg04461.html">(ASCEND) slow connect rates and ..</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: phil@q1.net</LI>
</UL>
</UL>
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg04459.html">Re: (ASCEND) Lost Password on an 4002</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg04448.html">Re: (ASCEND) Pipeline 75b NAT vs Quake World</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg04461.html">(ASCEND) slow connect rates and ..</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg04469.html">Re: (ASCEND) slow connect rates and ..</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="maillist.html#04449"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd166.html#04449"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>