No Subject

I believe the Cisco series in question actually has old Combinet 
software in it. It is NOT the Cisco IOS software. (which is VERY 
compatible with ascend MPP, etc) 

I am getting strange dialing probs. sometimes I get 128K, altho most of 
the time I dont because of some error. We use Centrex 3 digit intercom 
dialing. So I will have the 762 dial the 3 digit # and the 1st B channel 
connects, then the Ascend passes th full 10 digit # back to the cisco 
for the second call which returns a busy code. The busy is coming FROM 
the Pipeline 50. NOT the the telco network.

I am using the NI-1 switch type. 

Just a note: this is NOT a telco setup problem. I have the convience of 
having a direct line to a centrex isdn engineer at the telco (with 25 yr 
expirience) He can instantly detect, correct, fix any dialing, or call 
setup probs, as well as do call traps to analyze what is happening. In 
this case the busy has been detected as coming from the Ascend when the 
Cisco tries to setup the 2nd B-channel.


I am bummed because usually I can make anything work with Pipelines, and 
max's reliably (including the kitchen sink..hehe), with or without 
authentication, etc. And the standard Cisco IOS software is so compatible, 
you can use the Ascend MPP on the pipelines. =) But these little 762s cant 
hang for some reason. =(



Any thoughts, suggestions or expireiences are welcome. =)

thanks in advance,
todd
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	&lt;<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>&gt;

</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<HR>
<STRONG>Follow-Ups</STRONG>:
<UL>
<LI><STRONG><A HREF="msg04145.html">Re: (ASCEND) cisco762 ---&gt; ascend .... yuk</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Don Joy &lt;joydon@soonet.ca&gt;</LI>
</UL>
</UL>
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg04145.html">Re: (ASCEND) cisco762 ---&gt; ascend .... yuk</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg04142.html">RE: (ASCEND) Re: Known Bug Tracking</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg04157.html">Re: (ASCEND) How to specify REALM for certain RADIUS CLIENT.</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg04145.html">Re: (ASCEND) cisco762 ---&gt; ascend .... yuk</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="maillist.html#04143"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd160.html#04143"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>

<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>