> Saw something like this happen once... it was also on GTE provided BRI, but > on a different MAX (1800, I think). > The problem was in the BRI provisioning on the switch end, and I wouldn't > say it was a GTE configuration fault, more an unfortunate choice. They > had set the channels up for "EKTS=YES"; we want "EKTS=NO". > Should be worth a shot, but you've got to have the provider do it on their > end... nothing we can do about it on the max end. Feh. Turns out the answer to the problem was on the Ascend web pages at <A HREF="http://www.ascend.com/890.html">http://www.ascend.com/890.html</A> (how to configure hunt groups on a 5ESS) and <A HREF="http://www.ascend.com/719.html">http://www.ascend.com/719.html</A> (how to configure the Max 200+ to work with a hunt group) Thanks to Jim Howard (jhoward@lyceum.com) for this bit of information, but a big ugly Bronx cheer to every last friggin' Ascend tech who didn't even know about these pages (or this configuration issue)! The problem was that the Pri Number and Sec Number parameters MUST be blank for all but the main hunt group number. (You still need the SPIDs for each channel, though.) This stuff is NOWHERE in our Max documentation, something that makes me see red. If you search using the keyword 'rotary' on the Ascend website, you get nothing. You have to use the keywords 'hunt group'. Worse, I can't find any way to get to those pages directly using the support page (<A HREF="http://www.ascend.com/169.html">http://www.ascend.com/169.html</A>). This is really annoying, but sadly typical for Ascend. All this leads me to another question: is there any scheduled release date for an updated version of the Max 200+ documentation? There are *so* many new parameters in the patch releases that probably a third of them aren't in the book that shipped with the box. Also, how can we buy an updated set? -- Robert L. McMillin | Not the voice of Syseca, Inc. | rlm@syseca-us.com Personal: rlm@helen.surfcty.com | rlm@netcom.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg03838.html">Re: (ASCEND) Debug mode on MAX TNT</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg03835.html">Re: (ASCEND) Zoom 1.002A code</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg03836.html">Re: (ASCEND) Debug mode on MAX TNT</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg03842.html">(ASCEND) K56flex - Nortel DMS10</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#03841"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd149.html#03841"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>