Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: (ASCEND) 5.0ap27????
Try
ftp://ftp.ascend.com/pub/Software-Releases/Max/Patch/Release-5.0Ap27/
Sonny Abalos
Calaveras Internet
admin@caltel.com
At Mon, 29 Sep 1997 15:10:10 -0400
wmizelle@funb.com wrote:
> I must be looking in the wrong place on the FTP server but I see no 5.0ap27 ?
>
> Can someone please point me in the right direction
>
> Walter
>
>
> Thanks in advance
>
>
> > From owner-ascend-users@max.bungi.com Mon Sep 29 13:28 EDT 1997
> > X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f
> > X-Sender: mhold@darla.ascend.com
> > Date: Mon, 29 Sep 1997 07:44:13 -0700
> > To: Jason Nealis <nealis@babylon.erols.com>
> > From: Matt Holdrege <matt@ascend.com>
> > Subject: Re: (ASCEND) 5.0ap27????
> > Cc: ascend-users@bungi.com, kevin@ascend.com
> > Mime-Version: 1.0
> >
> > At 02:55 AM 9/29/97 -0400, Jason Nealis wrote:
> > >What ever happen to the quick list of what's fixed and etc.. That we
> > >use to get from patty?
> >
> > That depends on someone being awake to forward them out. :)
> >
> > 5.0Ap27 for the MAX products has been given to support. This release
> > contains the following corrections:
> >
> > Corrections in 5.0Ap27:
> >
> > TR# Description
> > -------------------------------------------------------
> > 1818 TS "show calls" command does not display phone numbers
> > 1911 10-14 second lag between modem call disconnect and
> > 'No carrier' at calling modem
> > 2290 Getting FE 8 after upgrading from 4.6Cp11 to 5.0Ap5
> > 2318 MAX 4048 Modem dialout causes FE 1
> > 2435 MIF incomplete security profile allows full access
> > 2540 MSN client username is not interpretted by the MAX
> > 2589 RADIUS accounting and authentication use a single sequence
> > of packet IDs
> > 2648 RADIUS accounting problem on 5.0Ap23
> > 250127 MAX4000 RESETS with FE 2-
> > n/a FE 106; tik.m40; 5.0Ap14
> > n/a Bad SNMP service change events for raw-TCP sessions.
> > n/a MAX200 Hangs up twice and sometimes fails to recognize
> > Bullet Modems
> > n/a T1 timer not configurable and loss of auto-call cap.
> > when X.25 is disabled
> > n/a Multicast Heartbeat broken.
> > n/a Problem running OSPF in MAX with numbered links.
> > n/a wandrv handled txPending in inconsistent way
> >
> >
> > Matt Holdrege - http://www.ascend.com - matt@ascend.com
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: