Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX Loosing STATIC ROUTES
I have had this problem with my MAXen as far back as I can recall. A
static route that has a gateway that is part of a negotiated connection
(dialup POTS or ISDN) does not get put in the route table. Looks like
the MAX does not rescan the static routes table upon each connect to see if
the route needs to be reactivated. If you use RADIUS, you can include the
route in the user profile and it will come active with the connect. I reported
this problem to Ascend last year ... they just weren't interested in looking
into it.
Erich Stick Sierra-Net Internet service
SysOp (702) 832-6911
erichs@sierra.net
On Mon, 22 Sep 1997, Bill Hamel wrote:
> Date: Mon, 22 Sep 1997 09:27:57 -0400
> From: Bill Hamel <bill@hamel.net>
> To: ascend-users@bungi.com
> Subject: (ASCEND) MAX Loosing STATIC ROUTES
>
> Hi,
>
> Curious if anyone has or is experiencing this. We are running AP24 on our
> MAX4004's. One of them I set a static route to a user who has a dedicated
> dial in account. Everything works fine except once every few days we get a
> phone call and sure enough when we do a 'routeip show' the route is gone.
>
> I look in Ethernet->Static Routes there route is active. The way I get the
> route back in is I Set "Active?" to NO -> SAVE and then go into the route
> again and set it active and save. Now the route is back.
>
> Any help would be greatly appreciated.
>
> Regards,
> Bill Hamel
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: