Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 5.1A for the Pipelines
At 09:49 AM 9/10/97 -0700, Robert Dirksen wrote:
>Hi Kevin
>
>Thanks for the information about 5.1A. Is this version also applicable
>for Pipe 50 in Europe, or to more precise in the Netherlands. I currently
Yes. It supports all versions within the guidelines of the release notes.
>use AT&T/P-T-P as swithchtype which works fine, so if 5.1A does not
>include NET-3 I don't care.
>model P50-1SBRI-E
>p/n 0710-0260-001
>s/n 7186027
>date 6/96
This is one of the "older" P50s (a relative term), so is not upgradeable to
a P75 as the "newer" ones are....
>Exept for connection from my home to my IPX net in the office, I want to
>use the Pipes for connection to my ISP who is using Cisco IOS routers.
>They work with dynamic IP addressing, and I should run NAT. Is 5.1A
>supporting dynamic Ip addressing or is the answer in the FAQ about
>dynamic addressing still valid?
Dynamic IP is supported in 5.1A, which FAQ # do you refer to...so I can see
if it needs to be updated..?
>Last but not least, How do I install 5.1A and how to save the 5.0 in case
>I need to restore it.
Upgrade instructions are included in the release notes. If you have a TFTP
server available locally, it makes things much easier....or XMODEM via the
serial port. Let me know if you can't find and/or understand the instructions.
5.0A is available also on the FTP server:
ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-5.0A
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: