Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 56K connectivity
I found the problem... I changed my padding on the digital trunk to
0db... Should be able to do this with both Siemans and Northern
Switches..
I can now connect faithfully at 48000..
later
> From: phil@q1.net
> To: Jason Nealis <nealis@babylon.erols.com>
> Date: Fri, 5 Sep 1997 15:11:20 +0000
> Subject: Re: (ASCEND) 56K connectivity
> Cc: ascend-users@bungi.com
> Priority: normal
> Zoom 56K internal modems & I'm not sure of may customers because they
> don't even know...
>
>
> > Date: Fri, 5 Sep 1997 13:00:42 -0400 (EDT)
> > From: Jason Nealis <nealis@babylon.erols.com>
> > To: phil@q1.net
> > Cc: ascend-users@bungi.com
> > Subject: Re: (ASCEND) 56K connectivity
>
> >
> >
> > What client modem are you using to dial into the max with? Hayes
> > by chance?
> >
> > Jason
> >
> >
> > On Fri, 5 Sep 1997 phil@q1.net wrote:
> >
> > > Hi,
> > >
> > > I have not been able to get 56K modems to work with my system with
> > > the Ascend 56K Modems... We have Channelized T1's coming out of
> > > Sieman-Carlson DCO Switch to our Max...
> > > If Ascend calls in on a demo account they connect at 48000 consistantly...
> > > If I try, I get an ASCII string that runs through my post dial-up terminal
> > > screen.. I turned the screen on just to see what was happening.... I have
> > > spent numours hours on the phone with Ascend.. They say that it is in my
> > > local loop...Do to line quality... If I change the Max setting to run
> > > at v.34 the 56k modems work.. I have one customer out of my exchange who
> > > says he can connect using his 56k Boca Modem, but only at 36000.. Don't
> > > understand I think he is dialing into a Nortel DMS10 or 100... Which
> > > then hits our trucks not our linecards... IS anyone else using the
> > > same configuration I am.. Or do you have any suggestions..
> > >
> > > Using Max 4000 with 5.0Ap20 firmware..
> > >
> > > Thanks,
> > > Phil Maag
> > > Internet Director
> > > Q1.Net
> > > phil@q1.net
> > > ++ Ascend Users Mailing List ++
> > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> > >
> >
> >
> Phil Maag
> Internet Director
> Q1.Net
> phil@q1.net
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
Phil Maag
Internet Director
Q1.Net
phil@q1.net
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>