Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) HP/C Palmtop & Ascend Max failed dialup
Have you tried the infamous S15=128 to disable V.42?
I did some testing with a 320LX and had no problems, but was using an
old Megahertz XJ1144 modem.
Regards,
Dean Heltemes
______________________________ Reply Separator _________________________________
Subject: (ASCEND) HP/C Palmtop & Ascend Max failed dialup
Author: owner-ascend-users (owner-ascend-users@max.bungi.com) at
hdqt-unix-uuencode
Date: 9/15/97 2:31 PM
Ascend Max4004
Software 5.0Ap5, Load: tm.m40
Dialing up from a HP/C 320LX palmtop
Windows/CE Version 1.0 Build 782-782
Using a PCMCIA
US Robotics Sportser 28.8
V.34/V.FC/V.32bis, Faxmodem
It will connect, then drop the connection.
(Using PPP or Post Dialup Terminal Screen
after username and password entered)
>From the Ascend, disconnect code is:
40-PPP LCP negotiation timed out.
I put the modem in a laptop and can dial up.
I think I successfully copied the INIT strings
from the laptop to the HP/C.
I can use the HP/C and modem to dial up several
other providers that aren't using Ascend or
Max4004.
Any thoughts or shared-experiences would be
appreicated. Thanks in advance.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: