Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) MRTG and Pipeline130



At 09:17 AM 12/16/97 -0800, Josh Beck wrote:
>> I have a Pipeline 130 (software 5.1Ap6) and am attempting to run MRTG to
>> watch the in's and the out's.  But when I do an SNMPwalk, it is only
>> showing the console interface and 1 of the B channel interfaces.  No
>> ethernet, no second B channel. 
>> 
>> Any ideas?
>
>I've seen this as well. I had lots of problems with 5.0ApX where X was
>fairly low... seems to be that moving 5.1Ap4 fixed it. 

Aha, I knew I'd read that somewhere - maybe it was an earlier posting ?

>Perhaps it's now
>broken again in 5.1Ap6. 

There were *very* few changes to anything between p4 and p6 - so I would
be very surprised.

>It could also be something that isn't related to
>version, but instead could be fixed by doing a fclear, nvramclear, then
>loading the same version again.

Yes, that would be my guess too.


Kevin


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


References: