Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max 5.0Ap36
Actually right now what I do it via SNMP, But I still have to telnet
to each box and do the nvram, Cause the SysReset variable is only
in the I branch (UGH COUGH COUGH DAMMIT), But once 6.0 comes up
you can use this upgrade as many boxes as needed but you need CMU's
SNMP installed to do it.
I'll but the script up on the FAQ later today, I'll email with the
location.
Jason
On Tue, 2 Dec 1997, John Coy wrote:
> Hey Jason,
>
> Do you use any special software that you wrote to do this?
> I mean, certainly you don't telnet to 100 MAXen and update
> the config like that? If you wrote some perl script or
> some other program to automate the task, could you share it
> with the mailing list?
>
>
> At 12:18 AM 12/2/97 -0500, you wrote:
> >
> > I'm going to load it tonight on about 100 boxes, So, If there are
> >any problem, I'll post em as they occur.
> >
> >Jason
> >
> >
> >On Mon, 1 Dec 1997, Michael Medwid wrote:
> >
> >>
> >> Having been bitten by being an early adopter of 5.0Ap34 (hey - it was
> >> there!)..I'm a bit
> >> reluctant to embrace Ap36. Anyone have some solid up time with this
> >> revision?
> >> I'm especially interested if you're routing IP and IPX. Thanks. -Michael
> >>
> >>
> >> ++ Ascend Users Mailing List ++
> >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> >> To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >>
> >
> >++ Ascend Users Mailing List ++
> >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: