Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) ATMP FA Radius Profile



userA    Password = "test"
         Ascend-Metric = 2,
         Framed-Protocol = ppp,
	  Ascend-Assign-IP-Pool = 1,	
         Ascend-Home-Agent-IP-Addr = 10.0.0.1,      ; IP address of HA of A
         Ascend-Home-Agent-Password = "intranet",
         Ascend-Home-Agent-UDP-Port = 5150


userB    Password = "test"
         Ascend-Metric = 2,
         Framed-Protocol = ppp,
	  Ascend-Assign-IP-Pool = 2,	
         Ascend-Home-Agent-IP-Addr = 20.0.0.1,	   ; IP address of HA of B
         Ascend-Home-Agent-Password = "intranet",
         Ascend-Home-Agent-UDP-Port = 5150


you can define two IP pool in your FA Max4k, Pool 1 is for userA, pool 2 is
for userB.


best regard

jamesz


At 10:57 AM 8/28/97 +0800, K.R.Kumar wrote:
>Hi everyone,
>
>Thank you very much for your reply.
>
>What we are trying to do is creating a separate pool of IP address 
>for Cutomer A and Customer B.
>
>Because Customer A and B Can have more than 300 users and hence trying
>to use Pool.
>
>How the radius entries looks like for the above one.
>
>
>Thank you
>
>Regds. 
>K.R.Kumar
>
>
>Zhang Hongzhong wrote:
>> 
>> At 06:08 PM 8/27/97 +0800, K.R.Kumar wrote:
>> >Hi,
>> >
>> >
>> >We are trying to do ATMP Tunnel for the following SETUP :
>> >
>> >
>> >
>> >                                        HOME_AGENT [Company B]
>> >
>> >        HOME_AGENT[Company A]           |
>> >                                        |
>> >                              |         |
>> >                              |         |
>> >
>> >                               INTERNET
>> >
>> >                                   |
>> >                                   |
>> >                                   |
>> >
>> >                                FOREIGN_AGENT
>> >                            [For Company A & B]
>> >
>> >
>> >  * Company A and Company B are two different networks
>> >
>> >  * Company A and Bs clients  are calling FA.
>> >
>> >  * Clinets of Company A and B getting IP from their respective
>> >    Home Agents.
>> >
>> >
>> >  Can you please help us to clarify the following :
>> >
>> >
>> >  a) Is there any limit on no.of tunnels in HA and FA
>> 
>> The Max 4000, TNT and GRF each have a rough limit on tunnels. The Max can
>> basically handle hundreds of tunnels as a home agent. The TNT and GRF can
>> handle tens of thousands per interface. As foreign agents, they would
>> handle up to the limit of inbound trunks.
>> 
>> >  b) If Company A and B wants to carry out additional
>> >     security , how we can do this.
>> 
>> What sort of security? IPsec? ATMP provides backbone security through
>> switching as well.
>> 
>> >  c) How the radius entries looks like for FA.
>> 
>> That's spelled out quite well in the manual.
>> 
>> >  d) Is it necessary that HAs should have its own Radius Server.
>> 
>> HA's don't use Radius.
>> 
>> >  e) Is it necessary that HA should be MAX 40XX or any other
>> >     Pipeline produt with ATMP enabled which can allow us
>> >     to configure IP pool or we have to do it in Radius
>> >     side of Home Agent.
>> 
>> Radius sends the pools to the FA, not the HA.
>> 
>> Matt Holdrege  -  http://www.ascend.com  -  matt@ascend.com
>> ++ Ascend Users Mailing List ++
>> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd:   <http://www.nealis.net/ascend/faq>
>> 
>> FYI: below is the sample user profile:
>> 
>> user1   Password = "test"
>>         Ascend-Metric = 2,
>>         Framed-Protocol = ppp,
>>         Framed-Address = 200.1.1.2,
>>         Framed-Netmask = 255.255.255.0,
>>         Ascend-Home-Agent-IP-Addr = 10.0.0.1,
>>         Ascend-Home-Agent-Password = "intranet",
>>         Ascend-Home-Agent-UDP-Port = 5150
>> 
>> note: the Framed-Address must be the node address in home network !
>> 
>> by the way, witch version software are you using ? is 5.0Ap16 ?
>> 
>> best regards
>> 
>> jamesz
>> 
>> james zhang ( Zhang HongZhong)
>> ========================================================================
>> 张 洪  忠                                      James Zhang
>> 联迅网络有限公司                          UCS Communications Ltd.
>> 上海辨事处                                    Shanghai Rep. Office
>> 上海市东湖路20号                             Rm. 604 Shanghai Taipan
Business Center
>> 大班商务中心604室                             No.20 Donghu Lu,
>> 邮编: 200031                            Shanghai 200031, P.R.C.
>> Tel : (86-21) 6474-6708, 6474-6709      Email : jamesz@unitech.com.hk
>> Fax : (86-21) 6474-6965                 Mobile: +86-1391638311
>> 
>> " Your source for networking products and solutions!"
>> ========================================================================
>
>-- 
>
>
>It's easier to make a working system efficient than
>to make an efficient system work.
>
>*************************************************** 
>
>K.R.Kumar                   email:krkumar@pacific.net.sg
>Pacific Internet Pte Ltd.,  Phone:872 0322
>89 Science Park Drive       Fax  :773 6812
>#04-09 / 12 The Rutherford,
>Singapore Science Park,
>Singapore - 118261.
>
>***************************************************
>
>
james zhang ( Zhang HongZhong)
========================================================================
张 洪  忠				       James Zhang 
联迅网络有限公司                          UCS Communications Ltd.
上海辨事处 	                              Shanghai Rep. Office
上海市东湖路20号		             Rm. 604 Shanghai Taipan Business Center
大班商务中心604室			      No.20 Donghu Lu, 
邮编: 200031                            Shanghai 200031, P.R.C.
Tel : (86-21) 6474-6708, 6474-6709      Email : jamesz@unitech.com.hk
Fax : (86-21) 6474-6965                 Mobile: +86-1391638311

" Your source for networking products and solutions!"
========================================================================

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


Follow-Ups: