Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) problems with merit radius !
On Sun, 24 Aug 1997, Alexander Strauss wrote:
> Hi there,
>
> I'm using a Max 2000 Router together with the Livingstone radius package
> without any problems. Now I'd like to use the Merit Radius package, but the Max
> does't work correctly with the radius daemon. The user is authenticated,
> accounting is started, an IP address is assigned, but it's not possible to send
> any IP package through this connection. The Ascend simply does not set any
> route for this connection.
>
> Sample Radius entry:
>
> test Password = "xxxxx"
> Service-Type = Framed,
> Framed-Protocol = PPP,
> Ascend-Assign-IP-Pool = 1,
> Ascend-Idle-Limit = 300
>
> Any inputs would be appreciated.
>
> Alex
Alex,
Is this person getting a pooled address or a staticly assigned
one? If so, where is the ip address assignment statement in the radius
entry? There would need to be an IP assignment line, and then a
netmask. The lines would read something like this:
Framed-IP-Address = xxx.xxx.xxx.xxx,
Framed-IP-Netmask = 255.255.255.xxx,
I'm pretty sure that's the proper syntax for Merit.
Or, if you're doing dynamic IP assignment, is the pool routed to the max?
Are you running routing protocols like OSPF or RIP on your maxen and your
core/edge routers? Is the pool staticly assigned to the MAX?
Joe Shaw - jshaw@insync.net
NetAdmin - Insync Internet Services
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: