Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Cisco 2503 -> Max 4000
I think this may be what you are looking for,
http://www.cisco.com/warp/cpropub/67/sh.html
I was looking at the same problem over BRI
John
http://www.cisco.com/warp/cpropub/67/sh.html
> From: shiggins@naccess.com (Sean Higgins)
> To: "'ascend-users@bungi.com'" <ascend-users@bungi.com>
> Subject: Re: (ASCEND) Cisco 2503 -> Max 4000
> Date: Sun, 03 Aug 1997 13:29:18 GMT
> MIME-Version: 1.0
> Content-Transfer-Encoding: 8bit
> X-MIME-Autoconverted: from quoted-printable to 8bit by WorldHQ.com id PAA17543
>
> On Wed, 23 Jul 1997 00:37:57 +0200, you wrote:
>
> >Ive looked through the FAQs and havent been able to find what I was after...
> >
> >Im trying to connect to a Max 4000 from a 2503's aux port via modem (still
waitng for isdn at home).
> >
> >Has anyone got any sample cisco configs for setup? or a setup using an ISDN
BRI? Ive got the cisco to dial via the aux port, but I seem to be getting stuck
on the authentication...
> >
> >Is it also possible to get this configuration to work with an unumbered async
1 port?
>
> I just got this working on a BRI with unnumbered, so I would think it
> would work over an async port. I got a suggestion from an Ascend
> engineer telling me to disable authentication on the Cisco side. He
> said something about when you put the authentication on the Cisco
> side, when dialing, the Cisco will request authentication from the
> Ascend which causes problems to the Ascend...
>
> Sean
>
> --------------------
> Sean Higgins -- "Always count your advantages!"
>
> For information on IP, see http://www.brak.com/shiggins
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ WorldHQ Internet Services +44 1782 855 655 +
+ http://www.WorldHQ.net +44 1782 535 184 fax +
+ john@WorldHQ.net +44 486 488 052 mobile +
++++++++++++++++++..Pushing the envelope..++++++++++++++++++++
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>