where could 1a:61:a1:72:b4:c6 be coming from?  that's not right, and not
what i put in HWADDR


On Fri, Oct 27, 2017 at 10:16 PM, gregrwm <tclug1 at whitleymott.net> wrote:

> two nics both setup as bridges work fine in centos6, second nic won't
> start on the same box in centos7.  i added HWADDR, removed udev rules,
> removed network manager, no luck, anyone know what's needed?:
>
>   #  ifup enp4s1
> ERROR     : [/etc/sysconfig/network-scripts/ifup-eth] Device enp4s1 does
> not seem to be present, delaying initialization.
>
>   #  ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>        valid_lft forever preferred_lft forever
> 2: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0
> state UP qlen 1000
>     link/ether 00:e0:81:5c:a2:9e brd ff:ff:ff:ff:ff:ff
> 3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
> qlen 1000
>     link/ether 00:e0:81:5c:a2:9e brd ff:ff:ff:ff:ff:ff
>     inet foo.240.82.4/28 brd 209.240.82.15 scope global br0
>        valid_lft forever preferred_lft forever
> 4: br1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
> UNKNOWN qlen 1000
>     link/ether 1a:61:a1:72:b4:c6 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.1.244/24 brd 192.168.1.255 scope global br1
>        valid_lft forever preferred_lft forever
>
>  #  head -99 /e*/s*/n*/*{br,enp}*
> ==> /etc/sysconfig/network-scripts/ifcfg-br0 <==
> TYPE=Bridge
> DEVICE=br0
> ONBOOT=yes
> DELAY=0
> BOOTPROTO=static
>   NETMASK=255.255.255.240
>    IPADDR=foo.240.82.4
>   GATEWAY=foo.240.82.14
>
> ==> /etc/sysconfig/network-scripts/ifcfg-br1 <==
> TYPE=Bridge
> DEVICE=br1
> ONBOOT=yes
> DELAY=0
> NM_CONTROLLED=no
> BOOTPROTO=static
>   NETMASK=255.255.255.0
>    IPADDR=192.168.1.244
>
> ==> /etc/sysconfig/network-scripts/ifcfg-enp4s0 <==
> DEVICE=enp4s0
> ONBOOT=yes
> DELAY=0
> BRIDGE=br0
>
> ==> /etc/sysconfig/network-scripts/ifcfg-enp4s1 <==
> DEVICE=enp4s1
> HWADDR=00:e0:81:5c:a2:9d
> ONBOOT=yes
> DELAY=0
> NM_CONTROLLED=no
> BRIDGE=br1
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.mn-linux.org/pipermail/tclug-list/attachments/20171027/35de9954/attachment.html>