The battery might not do it. Look through the manual or look for a jumper 
that says CMOS or CMOS RESET. Newegg won't let me zoom in on the picture 
so I can't look for itmyself.

On Fri, 17 Jul 2015, Brian Wood wrote:

> Clug writes:
> 
> > CPU sockets are usually ZIF, or Zero Insertion Force, sockets. That means
> > the CPU will just drop in without you having to apply ANY preassure. The
> > CPU will ABSOLUTELY NOT go in the wrong way. You would break/bend pins if
> > you tried.
> >
> 
> I had watched a video about that and that's what I tried to
> do.  I placed the cpu in the socket and didn't think it looked
> quite right so I picked it back up and set it back down again.
> Then I put the arm down.
> 
> 
> >
> > So... try clearing the CMOS, like it says. There's usually a jumper on the
> > motherboard for that.
> 
> I removed the battery and then put it back and tried booting,
> I did that two times, but got the "00" code still.
> 
> These are the components.
> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=i3+4370&N=-1&isNodeId=1
> 
> http://www.newegg.com/Product/Product.aspx?Item=N82E16813157561&cm_re=asrock_c226m-_-13-157-561-_-Product
> 
> --
> Brian
> Ebenezer Enterprises
> http://webEbenezer.net
> 
> 
> 
> 
>