On 1/19/2010 3:57 PM, Mr. MailingLists wrote:
> On 1/19/2010 3:24 PM, Raymond Norton wrote:
>> I have Ubuntu 1.8.10 server with X and gnome installed. I am attempting
>> to get my USB wireless adapter working on it.
>>
>>
>>
>> Here is the output from lsusb:
>> Bus 001 Device 006: ID 050d:705a Belkin Components F5D7050A Wireless Adapter
>>
>> The messages log shows the following:
>>
>> an 17 15:52:14 imac kernel: [14186.584008] usb 1-2: new full speed USB
>> device using ohci_hcd and address 6
>> Jan 17 15:52:14 imac kernel: [14186.643967] usb 1-2: configuration #1
>> chosen from 1 choice
>> Jan 17 15:52:16 imac kernel: [14187.872641] usbcore: registered new
>> interface driver rt2500usb
>> Jan 17 15:52:17 imac kernel: [14188.509399] usbcore: registered new
>> interface driver rt73usb
>>
>> Iwconfig shows:
>>
>> o wireless extensions.
>>
>> eth1      no wireless extensions.
>>
>> pan0      no wireless extensions.
>>
>> wmaster0  no wireless extensions.
>>
>> wlan0     IEEE 802.11g  ESSID:
>>              Mode:Managed  Channel:0  Access Point: Not-Associated
>>              Tx-Power=0 dBm
>>              Retry min limit:7   RTS thr:off   Fragment thr=2352 B
>>              Encryption key:off
>>              Link Quality:0  Signal level:0  Noise level:0
>>              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>>              Tx excessive retries:0  Invalid misc:0   Missed beacon:0
>>
>>
>> Ifconfig wlan0 up shows:
>> root at imac:~# ifconfig wlan0 up
>> SIOCSIFFLAGS: No such file or directory
>>
>>
>>
>>
>> I have tried adding necessary info to /etc/network/interfaces, but no
>> go. Wi-fi radar does not work. Ndiswrapper will not work on this
>> architecture, and iwlist wlan0 scan does not work.
>>
>> The adapter works fine on my Linux Mint laptop.
>>
>> Any idea what steps I need to follow to get this adapter working?
>>
>
> Probably missing the ralink firmware as is the usual suspect for this
> error. You could probably confirm by looking at the syslog when you try
> to bring this adapter up.
>
> Ensure you have firmware-ralink installed and try again. Hopefully this
> works ;-)
>
Err, that package may not be available for intrepid. I believe  Is 
available for intrepid and also contains the firmware.

http://packages.ubuntu.com/intrepid/net/rt73-common

-- 
()  ascii ribbon campaign - against html e-mail
/\  www.asciiribbon.org   - against proprietary attachments